Morimoto 6-Output Switched Power Wiring Harness - BAF024H

Proper: All wiring is properly sized and relays rated for flicker-free, reliable power delivery for up to six off road lights. OEM+: Not one component on the harness was overlooked for the sake of cost or simplicity. Every line of the beefy 10 AWG copper wiring is protected with black mesh insulation. Compatible: While this harness is a perfect match for the Morimoto 4Banger LED pods on the 16-21 Ford Raptor, you can make good use of it with any other off-road lighting setup that takes a DT-style two-pin input (which is basically the industry standard). Plug n Play: The connections on the harness have been laid out in a logical way to power up to three LED pods on each side of your vehicle. Your factory wire harness will fall apart before this thing. The wiring for the in-cabin push button switch has an in-line barrel connector that drastically improves ease of installation, since you don't have to jam the switch mechanism through the firewall. If you want the best, bingo. Proprietary over-molded inline fuse holder with 40A ATO fuse. Triple sealed proprietary 4-pin relays with dual-hanger. Stainless steel power and ground terminals. Power Up: The Morimoto 4Banger LED Pods have been developed from the ground up to set a new standard in their segment, and the same goes for the wiring. Relay: 2x Triple Sealed 40A M-Spec (2x);Switch: Normally off M-Spec with Yellow backlight;Outputs: 6x DT06-2 Pin;Output Wiring: Insulated 12 AWG Copper;Inputs: 12V+/- Ring Terminals;Input Wiring: Insulated 10 AWG Copper;Power: Up to 5A Per Output;Harness: 1x Morimoto OffRoad 6-Pod Power Harness;Switch: 1x M-spec Push Button Switch Kit;Warranty: Five Years (Click for Details);California Residents: WARNING There are six total deutsch outputs. If you want cheap, you'll want to look for an alternative (and sadly, that wont be hard to find -- because until now, everybody has overlooked the importance of quality cables). DT06-2S female outputs with dual seals. Every connector has been over-molded, sealed, or protected with heavy duty heat shrink. Proprietary M-Spec push button switch with Yellow-LED backlight. A positive battery terminal, and ground terminal, and a switch.

Lighting & Lighting Accessories > Lighting Accessories > Driving Light Wire Harness

Morimoto 6-Output Switched Power Wiring Harness - BAF024H