Fabtech 2.5 Inch Basic Lift Kit With Performance Series Shocks - K2333

The Fabtech track bar allows for on the vehicle adjustment to center the axle under the vehicle. This extra travel helps when offroading in rugged terrain.Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. This provides proper tracking of the front and rear axle for excellent highway manners.This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride.With the installation of this 2.5 lift the vehicle's stance front to rear will be nearly flat compared to the fac 2.5 inch lift;4WD Diesel engine models only;Kit features: Front coil springs;Adjustable front track bar;Sway bar drop brackets;Brakeline extention brackets;Front and rear Performance Series shocks;Tires and wheels: Tire Size 35/12.50R17 Wheel Size 179 w/ 4 3/4in BS w/minor trimming;Tire Size 35/12.50R18 Wheel Size 189.5 w/ 4 3/4in BS w/minor trimming;Tire Size 35/12.50R20 Wheel Size 209 w/ 5in BS w/minor trimming;Notes: will not fit dually models;Will not fit gas engine models;California Residents: WARNING To address this issue Fabtech provides a heavy-duty adjustable track bar. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. This allows for more travel with the Fabtech coil springs and components.To help keep the factory alignment specifications of the vehicle, Fabtech includes 2 degree adjustable alignment ball joint inserts. This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. With the large Super Duty wheelwell openings and this quality 2.5 lift kit, you can run 35 tall tires with ease.Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation.This suspension kit utilizes the factory bump stops without extensions. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. They help retain the factory caster specifications for optimum driveability.After a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar.

Suspension and Shocks > Lift Kits,Suspensions & Shocks > Complete Suspension Systems and Lift Kits

Fabtech 2.5 Inch Basic Lift Kit With Performance Series Shocks - K2333