Rhino-Rack RL 4.3 Leg Brackets - RL110S5

Rating :- 9.78 /10

Votes :- 15

Sleek and stylish bars which are cut to a length that matches your vehicles roof means no overhang and a comfrtable fit.

Utilising a simple and effective leg clamp attachment the 2500 RS roof system is easy to install and remove.. Removable; Easy to install / remove; Stylish;VGS bar strip provides greatly reduced wind noise;Strong and built to last;; Suitable for light off-road use ;Compatible with a wide range of accessories ;Tested and approved to Australian AS1235-2000 standards;California Residents: WARNING Rhino-Rack Vortex 2500 RS 2 Bar Roof Rack (Silver) - RS711 More great features include the long lasting santoprene rubber padding which won't rub off onto your vehicle and the lockable legs for added security.The Vortex 2500 RS roof rack system is specifically moulded to fit the contours of your vehicle's roof.

More great features include the long lasting santoprene rubber padding which won't rub off onto your vehicle and the lockable legs for added security.Another key feature of the Vortex 2500 RS is that it uses flush style Vortex bars which are cut to an exact length as determined by the width of your vehicle's roof.

.Utilising a simple and effective leg clamp attachment the 2500 RS roof system is easy to install and remove.

Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 26mm in height.These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar.

6 Spacer Blocks (max height 26mm);2 x M6 x 45mm bolts;California Residents: WARNING Rhino-Rack 2500 Leg Spacer (26mm) - RLKS3 The maximum height stacking that is recommended by Rhino-Rack is 42mm.

Mount Kits and Hardware

Rhino-Rack USA

The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm.

If you need to go higher, please use the JB Spacer / Height Adjustor (RLK2500HALF-JB).

Mount Kits and Hardware

Rhino-Rack USA

The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm.

If you need to go higher, please use the JB Spacer / Height Adjustor (RLK2500HALF-JB).These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar..