ReadyLift 2.25 Inch Front Leveling Kit - 66-3086

To ensure proper front lift height and suspension geometry, install the ReadyLIFT leveling kit WITHOUT the lower horseshoe spacer. At ReadyLIFT our goal is provide accurate and safe lifting and leveling solutions for our customers. Incorrectly using these kits on a truck with 2 2.25 inch front lift;Best quality, best design for the proper leveling lift on new body style GM 1500 trucks;CNC machined aircraft 6061-T6 billet construction;For use on 2017-UP models with stamped steel upper control arms;Not for use with vehicles equipped with factory air-ride suspension;Kit includes: pair of billet aluminum top mount strut extentions;Pair of billet aluminum lower strut extensions;DOM tubular steel upper control arms with HD ball joints;Maintenance free pivot bushings;New strut hardware;33 inch maximum tire diameter;33x11.50 for no rub on a 9 inch wide wheel with +12 offset;Vehicles equipped with magnetic ride control will require re-calibration;Some vehicles may require 1/2 inch front wheel spacers to run a 285 or larger tire on factory wheels;Note: check factory height prior to ordering or installing; Trucks with more than 22 inches of wheel hub to fender lip height may require less lift.;California Residents: WARNING For distances measuring greater than 22'' as described above, #66-3086 or #66-3085 should be modified to account for the pre-installed lift. This has resulted in GM mandating no lift kits or leveling kits are to be installed on these new vehicles. With this new leveling kit/control arm combination (PN 66-3086) you can now level the 2017-2018 GM 1500 trucks with assurance the vehicle will sit level, maintain the factory ride and you have the peace of mind you will never have the factory stamped steel control arm failure.NOTE: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o'clock position while the wheels are pointing straight forward. ReadyLIFT has engineered the perfect solution for leveling the 2017-2018 GM 1500 trucks. GM changed the upper control arms on the GM 1500 pickups to a stamped steel upper control arm that provides minimal structural support for the factory ball joint when in a lifted or leveled scenario. These new control arms are a direct replacement for the factory stamped steel arms and includes our proprietary heavy-duty ball joints and an industry first maintenance free anti-resistance bushing assembly that is self lubricating and features a free-rotating inner sleeve.. Our engineering team has developed the perfect leveling solution for these new GM 1500 trucks that includes our popular CNC machined billet aircraft grade aluminum 2.25 inch leveling kit along with strong DOM-tube steel upper control arms. If this measurement is greater than 22'' then the truck already has some factory or aftermarket front lift compared to a base truck.

Lift Kits,Suspension & Shocks > Leveling Kits > Suspension Leveling Kits

ReadyLift 2.25 Inch Front Leveling Kit - 66-3086