Artec Industries Shock Towers - BR1062

Lift Kits,Suspensions & Shocks

Suspension Accessories

Rating :- 9.62 /10

Votes :- 19

This axle is referred to as an AAM 14 bolt 10.5 ring gear and is found in '99-'06 GM 2500 and 3500 SRW trucks.

Brackets,Gussets & Tabs

Provides 3 different variations to obtain the optimal steering set up for your rig.

.99-04 Super Duty axle;Fully fabricated for the best steering geometry and clearances;Allows for straight tie rod - no bends;Clears even deep fabricated differential covers;Included knuckle bolts and tapered spacers for tight fit and increased strength;Welds directly to factory knuckles;Precision laser cut from 1/4 steel and CNC bent for accurate fitment;Welding required for installation;California Residents: WARNING Artec Industries Crossover High Steer Arms - HS6152 Configurable and affordable weld on arms for the 99-04 SuperDuty Knuckles to help eliminate those swap steering issues.

Performance Steering Upgrades

Steering Gear Box & Components

High Steer Arms

Want to beef up a section of tubing, whether it's lower links, tie rod, sliders or a section of cage, without adding a lot of weight?

This tube reinforcement is a great way to add protection exactly where it's needed.

Flex Joints,Rod Ends & Jam Nuts

Heim Joints

For 3.5 inch axle diameter;Not factory Dana axle on 07-18 Wrangler JK, 2 & 4 Door;Sold as a pair;2.625 inch mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc) and factory control arm bushings;This pair of brackets contains an integrated skid plate on the bottom of the bracket, which wraps around joint protecting it from direct impact and decreases premature wear on the joint.

;California Residents: WARNING They do not limit your up-travel!;Provides mounting locations for you Lower Control Arms, Shocks, and Sway Bar!;NOTE: This bracket requires welding to the axle and removal of the factory bracket. This leads to longer life and less replacements.

Brackets,Gussets & Tabs

Axle Bracket

For 3.5 inch axle diameter;Not factory Dana axle on 07-18 Wrangler JK, 2 & 4 Door;Sold as a pair;2.625 inch mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc) and factory control arm bushings;This pair of brackets contains an integrated skid plate on the bottom of the bracket, which wraps around joint protecting it from direct impact and decreases premature wear on the joint.

Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off;Shock Mounts are at factory height for a direct replacement. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off. Skid plate design does not restrict movement of joint.

Brackets,Gussets & Tabs

Axle Bracket