Morimoto PWM Harness: Morimoto Standalone Canbus (H4/9003) - H240
About The They are meant to be used as a substitute for a full relay harness, not in addition to one. 10in / 254mm;Material: Painted Cast Aluminum;INPUT: H4/9003 Male;OUTPUT: 9006 Female;Capacitance: 6800uF;Module: 1x Morimoto Standalone Canbus 2. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. For vehicles with DRLs on the high beam bulb, no problem
NOTE: Note that these will NOT work with vehicles that have DRL's (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. Simple: With fewer connections to make compared to something like a full relay wire harness, even your mom could set this thing up it's that easy. For vehicles with DRLs on the high beam bulb, no problem. Say goodbye to bulb out warning lamps and flickering caused by can-bus systems. The Standalone wiring harnesses DO NOT however work well on domestic cars/trucks like Chrysler/Dodge/Jeep. You guys need Morimoto's Mopar Spec Stuff! Sold as a pair: The standalone canbus headlight harnesses come as a pair, one for each side of the car. 10in / 254mm;Material: Painted Cast Aluminum;INPUT: H4/9003 Male;OUTPUT: 9006 Female;Capacitance: 6800uF;Module: 1x Morimoto Standalone Canbus 2.0 Module (H4/9003);Warranty: 2 Years;California Residents: WARNING Length: Approx. Euro-Centric: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. Effective: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Powerful: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly - using the power directly from the vehicle's factory headlight circuit. done. Perfect: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Input here, output there... They are meant to be used as a substitute for a full relay harness, not in addition to one.
Lighting & Lighting Accessories > Lighting Accessories > Driving Light Wire Harness
Morimoto PWM Harness: Morimoto Standalone Canbus (H4/9003) - H240
Lighting & Lighting Accessories > Lighting Accessories > Driving Light Wire Harness
Specifications of Morimoto PWM Harness: Morimoto Standalone Canbus (H4/9003) - H240 | |
|---|---|
| Category | Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Lighting |
| Instock | instock |
Last Updated
