RockJock Johnny Joint Adjustable Rear Trac Bar - CE-9120RJK

Familiarize yourself with the greasing instructions before greasing!Grease unit with non-synthetic, hi-moly lube grease, such as our CE-9013GThe Steering Stabilizer Bracket Kit that is included may be used with the stock stabilizer shock, an upgraded CE-9170SD1 TJ Wrangler - All Models (with stock outer steering knuckles);TJ Wrangler Unlimited (LJ) - All Models (with stock outer steering knuckles);XJ Cherokee - All Models (with stock outer steering knuckles);MJ Comanche - All Models (with stock outer steering knuckles);ZJ Grand Cherokee - All Models (with stock outer steering knuckles);(1) Tie Rod Assembly;(1) Drag Link Assembly;(1) Steering Stabilizer Shock Bracket Kit;Intended for use with 0-4 in.-6 in. diameter tie rod, a 1 1/4 in. of lift, but requires the use of a 2 in.

Jeep TJ/LJ rear lower shock mount extension brackets move the bottom of the shocks out away from the coil spring cup to avoid the shock contacting the spring cup.Sold as a pair, black powder coated, with hardware. RockJock Rear Lower Shock Mount Extensions - CE-9601 Sold as a pair..

) we most likely offer a better option of spring for your application.

Urethane pucks;Billet aluminum spacers;For 4 inch lift;California Residents: WARNING The bump stops extend the suspension stop impact point for proper contact in a 4 lift application.. This is a set for the front end only.

O. Sold each.Housing end retains the factory bolt.250 heavy wall DOM tubing;Uses 2-1/2 inch Johnny Joint;Grade 8 Hardware;California Residents: WARNING RockJock Johnny Joint Adjustable Front Trac Bar - CE-9120TJS This component replaces the stock XJ/TJ/LJ/MJ front track bar with an adjustable length Johnny Joint unit.

This unit is constructed of 1-1/4 heavy wall 4130 chrome moly tubing and features our 2 Johnny Joint rod ends at both ends..600 width with a 12mm hole for use in vehicles with stock rearend housings or most aftermarket bolt-on trac bar relocator brackets.

250 o.250 inch wall chromoly tubing;California Residents: WARNING RockJock Johnny Joint Adjustable Rear Trac Bar - CE-9120RJK The Johnny Joint adjustable length JK rear trac bar features precise bends for a perfect fit into the JK.d. Bar is fabricated from 1.

615 inches;Thread size: 7/8 inch, 14 TPI;Right hand threads;2.718 inch;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball. RockJock Narrow 2.

250 wall 4130 chrome moly steel tubing, and features a heavy duty urethane bushing on the frame end, and a custom 1 RH thread JK specific forged 2 diameter Johnny Joint greaseable rod end with jam nut on the other end.Arm is finished in semi-gloss black powder coat and the forged Johnny Joint end is finished in gold zinc plating.

0 Inch Forged Johnny Joint, 7/8"-14 Right Hand Thread Shank, 1. Body type: forged steel;Body series: 2.The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.615 inches;Thread size: 7/8 inch, 14 TPI;Right hand threads;2.