Fabtech 2.5 Inch Budget Lift Kit With Front Shock Extenstions - K2353

With the large Super Duty wheelwell openings and this quality 2.5 lift kit, you can run 35 tall tires with ease.Fabtech's coil springs retain the factory load carrying capacity while providing increased suspension travel. This extra travel helps when offroading in rugged terrain.Sway bar drop brackets are included to reposition the front bar so that the link ends do not go over center at full droop and cause bind. Fabtech provides extension brackets rather than longer brake lines to keep the factory brake system sealed for fast and trouble-free installation.This suspension kit utilizes the factory bump stops without extensions. The coil springs and associated bracketry allow for an additional inch of compression travel over stock without binding the suspension. The brake lines are relocated down on the frame with extension brackets to eliminate the possibility of overstretching the lines throughout the new travel range. This Super Duty lift kit is perfect for the enthusiast looking to run oversized tires and wants additional wheel travel for offroad use. The 4 blocks replace the 2.5 inch lift;4WD Diesel engine models only;Kit features: Front coil springs;Front shock extension brackets;Trac bar relocation brackets;Sway bar drop brackets;Brakeline extention brackets;Tires and wheels: Tire Size 35/12.50R17 Wheel Size 179 w/ 4 3/4in BS w/minor trimming;Tire Size 35/12.50R18 Wheel Size 189.5 w/ 4 3/4in BS w/minor trimming;Tire Size 35/12.50R20 Wheel Size 209 w/ 5in BS w/minor trimming;Notes: will not fit dually models;Will not fit gas engine models;California Residents: WARNING This allows for more travel with the Fabtech coil springs and components.Typically, once a Super Duty is lifted the front axle is pushed to one side due to the length of the track bar and the location. For owners that want to retain more of the factory nose-down appearance, Fabtech offers an optional 4 rear block kit (FTS22214). To address this issue Fabtech provides a heavy-duty 1/4 thick steel Track Bar mount. It repositions the track bar and front axle under the vehicle to the factory specifications. This provides proper tracking of the front and rear axle for excellent highway manners.This Super Duty lift kit retains the factory shocks with heavy duty shock extension brackets for a stock like ride.With the installation of this 2.5 lift the vehicle's stance front to rear will be nearly flat compared to the factory nose-down appearance.

Lift Kits,Suspension & Shocks > Complete Suspension Systems and Lift Kits

Fabtech 2.5 Inch Budget Lift Kit With Front Shock Extenstions - K2353