Cognito Motorsports Front Limit Strap Kit - 110-90227

The boxed sheet metal arms are powder coated Semi-gloss black. The allowable droop travel is also improved with the design of these arms. FK 1..

Note:Only for use on stock height or lifted vehicles with the OE center-link in the stock location.Pitman and Idler arms have been an inherent wear problem within the steering systems of Chevy and GMC trucks and SUVs for decades.This Cognito product is protected by Utility Patent number US 7,475,891 B2 - All Rights Reserved Greatly improves handling;Improves fuel mileage;Increases steering component and tire life;Reduces lane wandering and driver fatigue;Utility patent;Uses F.

Cognito Motorsports 11.5" U-Bolt Kit - 110-90651.6 X 11.

.Powder coated semi gloss black;Heavy-duty boxed sheet metal construction;Unique Cognito design package;Limited lifetime warranty;Lift Height: 7-9 and 10-12;SM Series;California Residents: WARNING Cognito Motorsports SM Series Compression Struts (7-9" / 10-12" Lift) - 110-90457 The Cognito SM Series heavy-duty (boxed Sheet Metal) construction and signature design, deliver both optimum performance and unique looks that will make your vehicle stand out in the crowd.

Note: These control arms are made with provisions for dual shock mounts.

.Torsion bar keys are used to set the ride height of the front of the truck and are commonly used in leveling kits, and it is important to set the height appropriately as to leave ample suspension droop travel to maintain a good ride quality. Torsion bar keys;Torsion bar keys are used to set the ride height of the front of the truck and are commonly used in leveling kits;Forged steel;Raw finish;California Residents: WARNING Cognito Motorsports Torsion Bar Keys - 110-90268 This kit is only used in leveling kit applications as well as lifted applications when the higher setting of that particular lift kit range is desired like taking a 7 Cognito lift kit to the 9 setting.

With no shock acting as the droop limiter, the upper control arm becomes the droop limiter which transfers that load causing premature wear to the upper ball joint. This kit is used when there is no front shock in the stock location to limit the droop travel. Cognito Motorsports Front Limit Strap Kit - 110-90227 It is a bolt in installation but requires holes to be drilled to mount the upper end, and there is adjustability built in to fine tune the length to control the droop limit.

Heavy-duty Zinc plated U-bolts and hardware are included. Cognito Motorsports 3" Block and 17.

With no shock acting as the droop limiter, the upper control arm becomes the droop limiter which transfers that load causing premature wear to the upper ball joint. This kit is used when there is no front shock in the stock location to limit the droop travel..

.