Synergy Manufacturing JK Complete UCA, LCA & Track Bar Hardware Kit - 8050-02

8550-01 track bars built 5/19/2015 and newer, and 8550-02 track bars built 2/13/2015 and newer already come with Dual Durometer Bushings (DDB).- 08-13 trucks with 16mm or 5/8 bolt: Must use 8529-01 Retrofit Kit. Polyurethane bushings can be upgraded to Dual Durometer Bushings (DDB) one of two ways depending on bolt size:- 94-07 trucks with 14mm or 9/16 bolt: Replace with 4323-01 Dual Durometer Bushing (DDB) or use 8529-01 Retrofit Kit. 03-13 Dodge Ram 2500 4x4, 03-12 Dodge Ram 3500 4x4, 06-08 Dodge Ram 1500 Megacab 4x4;Front track bar;Bent to clear most aftermarket differential covers;Retains factory track bar mounting bolts & hardware;Made from high quality 1.

A;California Residents: WARNING Synergy Manufacturing Dana 30 Front Lower Control Arm Skid Plates (Bare Steel) - 8112-07 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.

Synergy Manufacturing Sway Bar Disconnect Mount Hardware - 8077.Also available - Complete Synergy Jeep JK Front Sway Bar Quick Disconnect Kit, part number SYN8079.

07-18 Wrangler JK, 2 & 4 Door;Raises the vehicles axle side track bar mount by 3.

S.

.S.A;California Residents: WARNING Synergy Manufacturing Rear Lift Coil Springs - 8064-30 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.

A;California Residents: WARNING.S.

S..A;California Residents: WARNING Synergy Manufacturing Heavy Duty Fixed Rear Lower Control Arms - 8046 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.188 wall 1026 DOM tubing;Arms are bent up for added ground clearance;Features an OEM style bushing on both ends for extended performance and minimized road vibration;Arms are 1/2 inch longer than stock;Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity and ride quality;100% Bolt-on installation;Sold as a pair;Made in the U.

S.Replaces the hardware and specialized nut tabs that get destroyed from wheeling abuse High strength G9 hardware;Rear Track Bar;Front Track Bar Frame Side;Upper and Lower Control Arm bolts;Includes hardened extra thick washers that will not deform or contort like standard washers;Made in the U.A;California Residents: WARNING.

A;California Residents: WARNING Synergy Manufacturing Heavy Duty Fixed Rear Lower Control Arms - 8046 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.