Fifteen52 Turbomac HD Classic Wheel, 16x8 With 6 On 5.5 Bolt Pattern - Satin Gunmetal - THDCG-68069-00

.

Coilover heights indicated are for a stock equipped vehicle;Welding required - lower control arm;Does not work with TRD big brake kit;Not recommended with remote reservoir coilover;California Residents: WARNING Icon Vehicle Dynamics S2 Stage 1 Secondary Shock System - K53125 The ICON Vehicle Dynamics S2 Secondary Shock System redefines the off-road capability of the 2016-UP Toyota Tacoma by allowing for the installation of a secondary shock to an existing ICON coilover setup.

The ProLink XXL provides winch owners with a means to replace the conventional winch hook with a safer and stronger screw pin shackle/D-ring.

It means that if your rope retaining pin is smooth, and at least as big as the rope diameter or greater, you can run a soft thimble-less eye on the end of your rope and lose little to no breaking strength. Luckily for us off roaders, many technical papers have been written on this by rope manufacturers and cordage experts and corresponding tests have been completed.

75 inches of thickness, the Flatlink will work with all roller fairlead license plate mounting brackets. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring. With less than 1. It is installed easily in minutes.

Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 double shear pin. The ProLink is compatible with both Hawse and Roller fairleads and snugs neatly against both versions.

Blue;Titanium pin and rubber guard;Fits all steel cables and synthetic ropes up to 3/8 inch in diameter;Max load rating of 16,000 pounds;Screw pin shackles are up to 5X stronger than conventional winch hooks;Recover straps cannot slip out of a shackle like they can with hooks;Billet construction - precision machined from 6061-T6 Kaiser Aluminum round bar;Can be installed and removed in minutes - simple snap ring removal;Anodized and zinc plated;Made in the U..S.Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 double shear pin.

5 Bolt Pattern - Satin Gunmetal - THDCG-68069-00 Now, Fifteen52 is very pleased to be able to offer it as part of their Cast Monoblock wheel lineup.

Engineered and machined in the USA from lightweight billet 6061 aluminum, the ProLink provides a safe means to easily attach a standard 3/4 screw pin shackle to existing winch cable and rope eyes The cable or rope eye is captured into the body of the ProLink by a removable oversized 5/8 double shear pin.

With the continued success of Fifteen52's Turbomac design, they thought it was time that the off-road community deserved something strong, light and unique.