Artec Crossover Steering Kit - SK1403

Rating :- 9.63 /10

Votes :- 17

This bracket requires the use of a weld in sleeve and bushing (see options).

Add Daystar Bushings or Currie Johnny Joints to complete out these mounts. Precision CNC cut for great Laser etched part numbers for easy installation;Designed using CAD files for a precision Provides valuable reinforcement to an area prone to abuse and flex;Designed for stock upper control arm bracket replacement when using truss;Structure wraps around bushing sleeve for greater structural rigidity;California Residents: WARNING Artec Industries Dana 30/44 Truss Upper Control Arm Brackets with Daystar Bushings - TJ3005 When used with an Artec Dana 30 Truss, or Rubicon 44 Truss, this bracket provides an accurate location for you passenger side upper control arm mount.**Please note factory style bushings do not fit with this mount..

Brackets,Gussets & Tabs

Axle Truss

Simply use normal OEM height bushings with this kit.

These boatside body mounts will take you new places your factory mounts never could. Artec Industries Boatside Body Mounts - TJ2014 Artec Industries Boatside Body Mounts are designed to allow TJ and LJ owners to get rid of the clunky and weak body mounts that often either catch on obstacles or just plain rot off the frame.

Motor Vehicle Suspension Parts

Lift Kits,Suspensions & Shocks

Body Lifts & Bushings

Body Mount Kit

These Heavy Duty TJ Front Frame side Coil Buckets are a great replacement for your OEM coil buckets.

0 OD piece of DOM tubing;Direct replacement for TJs and LJs;Can work as an upgrade for leaf sprung vehicles looking to change to coil spring suspension;California Residents: WARNING Or are you looking to change to a coil suspension on your YJ or other leaf sprung vehicle? They will also allow you build your suspension the way you want, not limiting you to how the factory intended.

Brackets,Gussets & Tabs

Axle Ball Gussets

This heavy duty 3/8 and 1/4 truss is designed to take serious abuse and reinforce your entire axle.

Artec Industries is excited to announce the Triangulated TJ Sterling Axle Swap Kit.

Brackets,Gussets & Tabs

Axle Truss

This Vice Mount allows you to utilize the Quickslot system to mount and unmount your vice quickly and easily.Features:11.0 Inch Works For Vices With Mounting Holes 8.1 inch-11.0 inch Center-On-Center DiameterCNC Fiber Laser Cut and precision CNC Bent from 3/16 inch steel for a robust solutionHoles in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig somethingTwo angle locking slots-one smooth for allowing any angle, the other with preset holes at 15 degree incrementsJig Tabs locate plates for accurate assembly2.81 inch wide flat surface3/8 inch Hardware includedShipped flat packed and requires assembly and weldingMaterial: SteelSize: 11.0 InchThickness: 3/16 InchSold As: Each 11 inch works for vices with mounting holes 8.1 - 11 inches center-on-center diameter;CNC fiber laser cut and precision CNC bent from 3/16 inch steel for a robust solution;Holes in 1 inch increments and multiple base plate slotted holes lets you dial in exactly how you want to jig something;Two angle locking slots...one smooth for allowing any angle, the other with preset holes at 15 degree increments;Jig tabs locate plates for accurate assembly;2.81 inch wide flat surface;3/8 inch hardware included;Shipped flat packed and requires assembly and welding;California Residents: WARNING

Want to mount your Vice to the Jig Table but don't want to have to nearly permanently leave it attached? Artec Industries 11 Inch Vice Mount for Jig Table - TC1025.

1.25 inch-12 tpi tube adapter;1.5 inch ID;2.0 inch OD;Right hand thread;Made from 1020 CR steel;Sold individually;California Residents: WARNING

Tube adapter to attach your links to the rod ends.

Flex Joints,Rod Ends & Jam Nuts

Heim Joints

Crossover Steering Kit with 7/8 JMX rod ends;1 RH and 1 LH - JMX 7/8 x 3/4 bore rod end for tie rod;1 RH and 1 LH - JMX 7/8 x 7/8 bore rod end for drag link;2 RH and 2 LH - 7/8 x 14 tpi WRENCH FLAT tube adapters for 1.5 OD .250 wall tubing;2 RH and 2 LH - 7/8 x 14 tpi Jam Nuts;4 - 7/8 x 3/4 bore high misalignment spacers for drag link;1 - 1.5 OD x .250 wall 1026 DOM tubing 48 long for drag link;1 - 1.5 OD x .250 wall 1026 DOM tubing 54 long for tie rod;This kit will provide a drag link up to 54 inches long, and a tie rod up to 59 inches long;California Residents: WARNING

Artec Crossover Steering Kit - SK1403.

(10 inches long);Note: DOM tube may need to be cut to proper length;Note: Tube adapters require welding to tubing;California Residents: WARNING

the tube is not Superduty specific. Made specifically for Artec Industries SUPERDUTY FULL HYDRO WELD-ON HIGH STEER ARMS, this kit is the perfect compliment to Artec Superduty Full Hydro Ram Mount and a PSC DE Hydraulic Ram. Artec Superduty Full Hydro Tie Rod Kit - SK1004 Specifically for Superduty Full Hydro Weld-on High Steer Arms;7/8 JMX Rod Ends;2 - JMX 7/8 14tpi threaded x 3/4 bore Chromoly Heims (rod ends) - 1 RH, 1 LH;2 - JMX 7/8 14tpi threaded x 7/8 bore Chromoly Heims (rod ends) - 1 RH, 1 LH;4 - 7/8 14tpi jam nuts - 2 RH, 2 LH;4 - 7/8 14 tpi tube adapters - 2 RH, 2 LH;2 pairs - SHORT 7/8 to 3/4 High Misalignment spacers;2 - 1.

Crossover Steering Kit with 7/8 JMX rod ends;1 RH and 1 LH - JMX 7/8 x 3/4 bore rod end for tie rod;1 RH and 1 LH - JMX 7/8 x 7/8 bore rod end for drag link;2 RH and 2 LH - 7/8 x 14 tpi WRENCH FLAT tube adapters for 1.5 OD .250 wall tubing;2 RH and 2 LH - 7/8 x 14 tpi Jam Nuts;4 - 7/8 x 3/4 bore high misalignment spacers for drag link;1 - 1.5 OD x .250 wall 1026 DOM tubing 48 long for drag link;1 - 1.5 OD x .250 wall 1026 DOM tubing 54 long for tie rod;This kit will provide a drag link up to 54 inches long, and a tie rod up to 59 inches long;California Residents: WARNING

Artec Industries steering kit includes Everything needed to build a Heavy Duty Tie Rod and Draglink. Artec Crossover Steering Kit - SK1403.

(10 inches long);Note: DOM tube may need to be cut to proper length;Note: Tube adapters require welding to tubing;California Residents: WARNING

Tube adapters require welding to tubing. Made specifically for Artec Industries SUPERDUTY FULL HYDRO WELD-ON HIGH STEER ARMS, this kit is the perfect compliment to Artec Superduty Full Hydro Ram Mount and a PSC DE Hydraulic Ram. Artec Superduty Full Hydro Tie Rod Kit - SK1004 Specifically for Superduty Full Hydro Weld-on High Steer Arms;7/8 JMX Rod Ends;2 - JMX 7/8 14tpi threaded x 3/4 bore Chromoly Heims (rod ends) - 1 RH, 1 LH;2 - JMX 7/8 14tpi threaded x 7/8 bore Chromoly Heims (rod ends) - 1 RH, 1 LH;4 - 7/8 14tpi jam nuts - 2 RH, 2 LH;4 - 7/8 14 tpi tube adapters - 2 RH, 2 LH;2 pairs - SHORT 7/8 to 3/4 High Misalignment spacers;2 - 1.