Carli Suspension 3.0 Lift Dominator System - CS-DD30-19-H

The Dominator is pinnacle offering in boasting front Carli Signature tuned, King 3.0 remote reservoir shocks so large, we needed to engineer mounting systems front and rear for them to cycle properly and strengthen the chassis for the larger shocks. We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King's standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn't damaged as they're not brittle like the stock, hardened shafts.In the front, the shocks utilize a 3.0 King with a large Pintop Bushing to secure them to the factory location.The front, lower shock mount we provide a 1/4, boxed replacement for the weak, factory stamped, half-welded mount. The factory coil buckets offer very little support for th 19-22 Ram 2500 4X4 Hemi ;Ram 3 Dominator 3.0 System, 2019+ 2500 4x4 HEMI;Base Kit Includes:;CS-DEL-R-14:Rear Sway Bar End Links;CS-DFBD-1:Front Bump Drops;CS-DLRC-14-H:Front Linear-Rate Coil Springs;CS-DMRC-14-R1:Rear Multi-Rate Coil Springs;CS-DATB-1419:Adjustable Track Bar with Stabilizer Bracket;CS-DRAD-14:Radius Arm Drops;CS-DCM-20-HK:Transmission Crossmember, Extended Hardware Kit;CS-DRBD-AL:Rear Bump Drops;CS-DPRBDROP-14-R:Rear Track Bar Drop;CS-DD30SPKG-14-H:Carli Tuned King 3.0 Remote Reservoir Shock Package with Stainless Shafts, Reservoir Mounts, Brake Line Kit, Coil Isolator Supports, Front Lower Shock Mounts, Rear Upper and Lower Shocks Mounts, Bed Supports and E-Brake Relocation Bracket;CS-DVDBRKT-19:Harmonic Damper Relocation Bracket;California Residents: WARNING We designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platformwe then tuned the shocks around the custom pistons based on seat-of-the-pants feel. In an effort to provide customers with the best product, we do not sell off-the-shelf King 3.0s. As the old adage goes, there's no replacement for displacement. The top index included in the side specific mount servers to locate the shock mount off the axle's radius arm mount. Once the factory shock mount is removed, the Carli shock mount will be welded in place providing peace of mind and as much space as possible to cycle the 3.0 diameter cylinders of the Dominator shocks.Even slightly offsetting the lower shock mount, the factory brake lines that come over the top of the radius arm need to be relocated to prevent the wiper cap (blue cap on the bottom of the shock body from which the shaft extends) contacting the factory lines. We provide extended Stainless Brake Lines and routing brackets to clear the brake lines from the shocks completely.Another weak point.

Suspension and Shocks > Lift Kits,Suspensions & Shocks > Complete Suspension Systems and Lift Kits

Carli Suspension 3.0 Lift Dominator System - CS-DD30-19-H