RockJock's forged narrow Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 right hand threads on the shank, and a 2.625 mounting width offset ball with a .640 thru bolt hole. Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball. Body type: forged steel;Body series: 2.5 inch OD;Mount width: 2.365 inches;Thread size: 1.25 inch, 12 TPI;Right hand threads;2.25 inch shank length;Hole diameter: .5625 inch (9/16, 14mm);Misalignment: 42 degrees total;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. Finished in gold zinc plating.
Fabrication & Tools > Flex Joints,Rod Ends & Jam Nuts > Rod Ends,Heim,Johnny & NG Joints
RockJock Narrow 2.5 Inch Forged Johnny Joint, 1.25-12 Right Hand Thread Shank, 2.625 X 0.640 Ball - CE-9114N-28
Specifications of RockJock Narrow 2.5 Inch Forged Johnny Joint, 1.25-12 Right Hand Thread Shank, 2.625 X 0.640 Ball - CE-9114N-28 | |
---|---|
Category | Vehicles & Parts > Vehicle Parts & Accessories |
Instock | instock |
Last Updated