Artec Industries 1 Ton Superduty Axle Swap Truss And Brackets With Currie Johnny Joints - TJ6072

Rating :- 9.1 /10

Votes :- 14

Artec Industries 8.8 Swap Kit with Truss - TR8802

The Ford Explorer 8.25 narrower than the Dana 35. Every axle varies slightly and some fabrication may be required.8 is 1.

Lift Kits,Suspension & Shocks

The 3/8 thick truss top and 1/4 thick gussets incorporates a unique design to strengthen both the axle and the link mounting surface.

Made from 3/8 inch and 1/4 inch thick mild steel;Reinforced truss for maximum strength;Great link mount location;Bare steel;California Residents: WARNING Artec Industries Dana 60 Rear Truss - TR6060 This kit requires general welding and fabrication skills.

Lift Kits,Suspensions & Shocks

This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality.

The most noticeable is how the truss top now bends around the differential for a better fit and clearance.

Lift Kits,Suspensions & Shocks

This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality.

The most noticeable is how the truss top now bends around the differential for a better fit and clearance.. Fits 1999 and up Ford Super Duty front axles;3/8 thick mild steel truss top and 1/4 mild steel ram mount and gussets;Truss is super low profile allowing better clearance for oil pans and allowing more uptravel;Spans entire length of axle for complete reinforcement of the axle tubes;Reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;Clearanced for differential breather tube;California Residents: WARNING Artec Industries Low Profile Axle Truss - TR6050 This is ideal for vehicles needing more uptravel or those building low center of gravity vehicles.

The axle tube diameter is 2.75 inches.

5 inch long;Bare steel;California Residents: WARNING The 1/4 thick truss top incorporates a unique design to strengthen both the axle and provide a low profile link mounting surface.. The base truss itself spans about 32.

Lift Kits,Suspension & Shocks

Artec Industries Ford 9 Inch Backbone Truss - TR0905

This heavy duty truss system is designed to take serious abuse and reinforce your entire axle especially at higher speeds.. It will require trimming to fit. NOTE: This truss has no cutout for the center section.

By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems.

97-06 Wrangler TJ/LJ;Bracket and truss kit for Ford Super Duty axle swap;3/8 and 1/4 thick mild steel truss and 3/16 coil brackets;Includes all the brackets necessary for a complete axle swap;Includes upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts;Easily upgrade-able for future link geometry changes;Truss is reinforced using interlocked 1/4 thick gussets;Overall low profile design means your axle is stronger, sleeker, easier to fit into any vehicle;Less likely to interfere with vehicle components;California Residents: WARNING This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing control arm, spring, anti-sway bar, and shock mounting locations.The 3/8 and 1/4 thick truss incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength. Artec Industries 1 Ton Superduty Axle Swap Truss and Brackets with Currie Johnny Joints - TJ6072 Artec Industries is excited to announce the TJ 1 TON Axle Swap Kit for front 60 axles.

This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations.

Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be.

By incorporating the link mounts into the truss, hours of work and trial and error can be avoided when compared to other bracket systems.

The 3/8 and 1/4 thick truss incorporates a unique design to strengthen both the axle and incorporate the link brackets for ease of installation and added strength.

This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing the factory link, anti-sway bar, and shock locations.

Simply tack weld the truss together, place it on the axle and all the other brackets fit into place exactly where they need to be. 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;For use with JK Dana 44 rear;1/4 thick mild steel truss and brackets for much higher strength than the factory bracket;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, trackbar mount, and coil spring mounts;Brackets are jigged into truss and set exact position automatically;Trackbar mount includes both factory location and lifted bracket location for those who have aftermarket lifts;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;California Residents: WARNING Artec Industries Rear Axle Swap Kit - TJ4418 Artec Industries is excited to announce the JK2TJ Rear Axle Swap Kit.