Dynatrac Free-Spin Kit 1999-2004 Ford F-250 And F-350 With Dynaloc Hubs And Fine Wheel Studs - FO60-3X1104-H

Rating :- 9.01 /10

Votes :- 18

The angle cut also reduces the weight for easy loading.

Class III/IV;Quick Loading;Ball Mount;6000 lbs.. Tongue Weight;Black Finish;Bulk;California Residents: WARNING DrawTite Class III/IV Quick Loading Ball Mount (Black) - 40346 GTW / 600 lbs.The Drawtite Quick Load ball mounts have a angle cut that helps you load the ball mount into the receiver hitch with ease.

Drop Hitches & Ball Mounts

Towing

Trailer Hitch Ball Mount

DrawTite

All Drawtite hitches are backed by a nation wide lifetime warranty for piece of mind.

Tongue Weight;Incl. GTW;300 lbs.

Tongue Weight;Black Finish;California Residents: WARNING

DrawTite Class III/IV Ball Mount (Black) - 2736 GTW / 500 lbs.

Drop Hitches & Ball Mounts

Towing

Trailer Hitch Ball Mount

DrawTite

Gross Total Weight;200 lbs.

. Drawbar/Pin/Clip;Exhaust Temporarily Lowered For Install;No Drill Required;California Residents: WARNING All Drawtite hitches are backed by a nation wide lifetime warranty for piece of mind. Tongue Weight;Incl.Class I;Sportframe;Trailer Hitch;Rear;2000 lbs.

4.88 ratio;Eaton E-Lockers;Dynatrac-exclusive patented ProRock nodular-iron, high-pinion ProRock 62 centersection;Best-in-class ground clearance and more ground clearance than a factory Dana 44;U.S.-made forged, double heat-treated 1480 35-spline, 1-ton axleshaft assemblies;Dynatrac HD BallJoints;Dynatrac HD tie rod, 4140 heat-treated steering arm;Rear axle includes Dynatrac 14-inch brake upgrade with single-piston calipers;Dynatrac HD mechanical parking brake with adapters for stock JK parking-brake cable attachment;Both front and rear axles are 68.5 inches wide and have 8 on 6.5 wheel bolt pattern;California Residents: WARNING

. The Hard Core ProRock 60/60 Axle Set is ideal for Jeep Wrangler JK owners who need reliable drivetrain durability after upgrading to large tires, up to 40 inches in diameter.S.

Complete Axles & Third Members

Complete Axle Assemblies

07-18 Wrangler JK, 2 & 4 Door;Does not fit Rubicon models;Dana 44 rear axle;35 spline shaft;5x5 and 5x5.5 bolt patterns;New carrier required - sold separately;Includes tone ring;New wheel studs, bearings and seals are included;Made in the USA;California Residents: WARNING

This rear JK44 Axleshaft Upgrade Kit increases the shaft diameter to from 32- to 35-spline.-made, equipped with rolled splines and include new wheel studs, billet steel retainers, seals and all of the hardware that will be needed for installation. Dynatrac Dana 44 Rear Axle Shaft Upgrade - JK44-1X4234-B The shafts are U.

Axle Upgrade Kits

We engineered this ProRock 44 as a direct replacement housing for 2007-2018 Jeep Wrangler JK front axles, replacing the factory Dana 44, addressing the critical areas that fail when larger tires are installed and the vehicle is used regularly off-road.

.JK Rubicon Front Axle Housing Kit;Pro Rock 44 Center Section;Machined For Rubicon Tru-Lok Electric Locker Only;Includes Pro Steer Ball Joints;65.5 inch Overall Width;1/2 inch Wall HD Tube: Extra Caster For Lifted Applications;Requires Use Of Rubicon Style Axle Shafts;Reuses JK Knuckles Out;California Residents: WARNING Dynatrac JK Rubicon Pro Rock Dana 44 Front Unlimited Axle Housing with Pro Steer Ball Joints - JK44-1X3010-K The Dynatrac ProRock 44 front axle offers incredible strength and unmatched ground clearance.

Complete Axles & Third Members

Complete Axle Assemblies

Free-Spin Hub Conversion Kits include these features: heat-treated chromoly spindles;Top-quality bearings and seals;35-spline, 1.50-inch outer shafts;Wheel hubs;DynaLoc locking hubs;All necessary studs and hardware;Dynatrac Free-Spin Hub Conversion Kits are the only 100-percent U.S.-made kits available;NOTE: Trucks with dual rear wheels will require the use of a special dually wheel adapter.

This kit includes DynaLoc locking hubs, providing improved locking hub function, greater strength and a shorter profile for better clearance that reduces the chance of hub impacts on the trail. These can be purchased through Arrowcraft (248-280-0210). Dynatrac Free-Spin Kit 1999-2004 Ford F-250 and F-350 with Dynaloc Hubs and Fine Wheel Studs - FO60-3X1104-H The Dynatrac Free-Spin Heavy-Duty Hub Conversion Kit for 1999-2004 Ford F-250 and F-350 Super Duty trucks is designed to replace the factory unit bearings with fixed spindles for superior strength, and smooth performance. These parts have been made to work specifically with Dynatrac's Free-Spin kit.

Hub Conversions

We engineered this ProRock 44 as a direct replacement housing for 2007-2018 Jeep Wrangler JK front axles, replacing the factory Dana 44, addressing the critical areas that fail when larger tires are installed and the vehicle is used regularly off-road.

Complete Axles & Third Members

Complete Axle Assemblies

Free-Spin Hub Conversion Kits include these features: heat-treated chromoly spindles;Top-quality bearings and seals;35-spline, 1.50-inch outer shafts;Wheel hubs;DynaLoc locking hubs;All necessary studs and hardware;Dynatrac Free-Spin Hub Conversion Kits are the only 100-percent U.S.-made kits available;NOTE: Trucks with dual rear wheels will require the use of a special dually wheel adapter.

Dynatrac Free-Spin Kit 1999-2004 Ford F-250 and F-350 with Dynaloc Hubs and Fine Wheel Studs - FO60-3X1104-H The Dynatrac Free-Spin Heavy-Duty Hub Conversion Kit for 1999-2004 Ford F-250 and F-350 Super Duty trucks is designed to replace the factory unit bearings with fixed spindles for superior strength, and smooth performance..;California Residents: WARNING This kit includes is for trucks with fine wheel studs.This kit includes DynaLoc locking hubs, providing improved locking hub function, greater strength and a shorter profile for better clearance that reduces the chance of hub impacts on the trail.

Hub Conversions