Artec Industries Rubicon Dana 44 Front Axle Truss - TJ4401

A.

Key features include the integrated fog and turn lights, Air Ducts, D-Ring mounts and ability to accommodate up to 16,500 lb.. Fab Fours Heavy Duty Winch Front Bumper (Bare) - DR10-A2951-B Bare steel; Provides more tire clearance; Winch ready (Accepts up to 16,500 lb.

Fab Fours bumpers are custom made to order.

25 Rear Truss - TR1001 Also fits Sterling 9.25 Rear Axle Truss.. Artec Sterling Ford 10.

The Front 60 that works with this kit is from Ford Superduty F-250 and F-350 trucks from model years '99-04' (leaf spring) and 05+ (coil spring). 5+ inches recommended. The trackbar bracket is higher than stock location to allow proper steering geometry.

Artec Industries 1 Ton Front 60 Swap Kit - TJ6061 Artec Industries is excited to announce the 1 TON Axle Swap Kit for front 60 axles. 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;1984 to 2001 XJ Cherokee;1993 to 1998 ZJ Grand Cherokee;1986 to 1992 MJ Comanche;1985 to 1991 F-350 Dana 60 front axle;3/8 and 1/4 thick mild steel truss and 3/16 coil brackets;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, anti-sway bar mounts, tracbar mount, and coil spring mounts;Easily upgradeable for future link geometry changes;Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly;California Residents: WARNING This heavy duty truss and bracket system is designed to take serious abuse and reinforce your entire axle while also providing control arm, spring, anti-sway bar, and shock mounting locations.

Key hole slots on top of truss where keyed tabs would go must be filled with weld. The precision cut and formed components of this setup ensure a hassle-free installation. This heavy duty and light weight truss system is designed to take serious abuse and reinforce your front Dana 44 TJ/LJ axle.

.

Artec Industries Rubicon Dana 44 Front Axle Truss - TJ4401 This kit requires general welding and fabrication skills. Use this only if you aren't connecting the passenger side UCA or are reusing the factory bracket.

The 3/16 thick bracket also has a stamped coil correction so that your coil spring sits perpendicular to your axle. Direct replacement for brackets on a Dana 30 front end for a TJ, LJ, XJ, and ZJ;3/16 inch thick mild steel brackets;50% thicker than factory brackets;Precision CNC cut and bent for great fitment;Shock mounts are adjustable for shock end mounting widths;California Residents: WARNING Artec Industries Replacement Front Axle Coil Bracket - TJ3016 Other companies have a flat surface for a not-flat coil spring which results in bowing and less than desirable performance.