Synergy Track Bar Double Adjuster Sleeve - 3622-07-14L-10-PL

Rating :- 9.56 /10

Votes :- 17

(4320-01, 4320-02, 4320-03);Outer soft durometer acts as bushing cushion and flex material;Inner hard durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate.

00 Inch Wide - 4321-01 Synergy Dual Durometer Bushing (DDB) Series;Feature a maintenance free, grease less design;Self centering with 30 degrees of misalignment.Provides for a maintenance free zero bind bushing;Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex;Direct replacement available for aftermarket control arms using OEM Clevite style lower control arm bushings;Bushings available for all suspension components made by Synergy MFG as well as many other companies;Bushings are sold complete with inner sleeve installed;California Residents: WARNING Synergy Manufacturing Front Upper Control Arm Dual Durometer Bushing, 12MM Bolt, 2..

Motor Vehicle Suspension Parts

Lift Kits,Suspensions & Shocks

Suspension Accessories

Control Arm Bushing

Right hand thread;Fully greasable sintered metal on metal bushing design;Tie Rod end boot is made from silicone and polyurethane;Spring loaded bearing design keeps pressure on bearings;Made in the U.S.A;California Residents: WARNING

Outperforms the factory and all other aftermarket style tie rod ends by offering a larger shank with no stress riser (doesn't neck down at base) and elimination of the nylon ball race.

Performance Steering Upgrades

Tie Rod Assemblies & Components

Tie Rod Ends

Tie rod end low misalignment spacer;Fits Synergy part numbers 8568-01, 8568-02, 8568-03 (4134-L, 4136-L), 8702-01 (4138-L);Sold individually;California Residents: WARNING

Synergy HD Metal on Metal Tie Rod End Boots are made from tear/wear resistant black NBR and come with retaining springs. Synergy Manufacturing HD Low Misalignment HD Tie Rod End Boot - 4134-02.

Performance Steering Upgrades

Tie Rod Assemblies & Components

Tie Rod Assembly

Synergy Manufacturing Hub Centric Wheel Spacers - 4113-5-50-H

75 inch thick;CNC Machined from billet 6061-T6 aluminum;Features corrosion resistant red anodizing;High grade wheel studs and lug nuts;Can be used with factory or after market wheels;Includes Loctite;Sold as pair;Made in the U.

Tires & Wheels

Wheel Spacers & Adapters

Synergy Manufacturing Hub Centric Wheel Spacers - 4112-5-45-H

A;California Residents: WARNING.5 Bolt Pattern;Wheel hub centric for increased strength;1.50 inch thick;CNC Machined from billet 6061-T6 aluminum;Features corrosion resistant red anodizing;High grade wheel studs and lug nuts;Can be used with factory or after market wheels;Includes Loctite;Sold as a pair;Made in the U.Application: JEEP YJ, TJ, ZJ, XJ, COMMANCHE, 02-04 LIBERTY 5x4.

Tires & Wheels

Wheel Spacers & Adapters

These are for steering stabilizers only and are not intended for use with hydro assist Fits factory Jeep JK tie rod;Synergy Jeep JK tie rod;Synergy Jeep TJ/XJ/ZJ/MJ drag link;CNC machined from 1020 DOM material;Zinc plated for maximum corrosion resistance;Designed to mount factory and aftermarket style steering stabilizers utilizing a 1/2 inch mounting bolt and has a 5/8 inch mounting hole;100% bolt on components assures an easy, trouble free installation with the use of basic hand tools;Note: Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2 for compatibility;California Residents: WARNING

Synergy Manufacturing Steering Stabilizer Clamp (1-1/2" OD Tube) - 4050-50.These CNC machined steering stabilizer clamps are designed to mount any steering stabilizer utilizing a 1/2 inch mounting bolt to a 1-3/8 inch, 1-1/2 inch, or 1-5/8 inch diameter tie rod or drag link.

Lift Kits,Suspension & Shocks

Steering Stabilizers

Steering Stabilizer Bracket

See table for adjuster sleeve part number that matches the item you are trying to replace it on.

Replacement double adjust sleeve for Synergy part numbers: 8550-01, 8550-02;California Residents: WARNING Synergy Track Bar Double Adjuster Sleeve - 3622-07-14L-10-PL Replacement Double Adjuster Sleeve for all Synergy Items that use Double Adjuster Assemblies.

The tube adapter seals the link off from water or other debris entering the link which can cause damage over time.

1 1/4 inch-12 LH Thread;Tube ID: 1 1/2 inch;Ideal for link suspension designs with weld on bushings/joints at one end or bent suspension links;Made from solid stock 1018 Steel;Adapters Include: (1) Weld on Tube Adapter with Pinch Bolt Slit and Tubes, (1) Zinc Plated Double Adjuster Sleeve to be used with a Thread Shank Rod End, and (1) Pinch Bolt Hardware;Welding required;Made in the U.

See table for adjuster sleeve part number that matches the item you are trying to replace it on.

The tube adapter seals the link off from water or other debris entering the link which can cause damage over time.

S. An integrated drain hole lets any water that enters the threads of the adapter drain out.