Specialty Products Upper Control Arm Set - 25470

Rating :- 9.5 /10

Votes :- 14

This version features a .500 thru bolt hole, a 1.750 mounting width, 2 1/4 of 3/4-16 left hand threads on the shank, and is greasable through the outer shell.

750" x .500 inch (1/2);Misalignment: 30 degrees total;Lubrication Method: External zerk fitting located on joint body;California Residents: WARNING RockJock Narrow 2" Forged Johnny Joint with 3/4" LH Thread (1. We also keep the jam nuts for these units on hand at all times as well - see CE-9112JN.2 inches;Thread Size: 3/4 inch, 16 TPI;Thread Direction: Left hand;Shank Length: 2 1/4 inch;Mount Width: 1.

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 right hand threads on the shank, and a 1.970 mounting width ball with a .562 thru bolt hole.

RockJock Narrow 2.25 inch shank length;Hole diameter: .97 inches;Thread size: 3/4 inch, 16 TPI;Right hand threads;2.

RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!

Narrow Forged Johnny Joint; 2; 2.

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 right hand threads on the shank, and a 1.850 mounting width ball with a .562 thru bolt hole.

562 Ball - CE-9112N75-22 RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!. RockJock Narrow 2. Body type: forged steel;Body series: 2.

Tool is completely rebuildable, and all parts are available through RockJock.

2-1/2 inch Johnny Joint Assembly / Disassembly Tool;Allows For Easy Maintenance And Rebuilds;Use In A Vice Or On The Trail For Emergency Repairs;Heat treated steel c;California Residents: WARNING Tool can be used either in a bench vise, or it can also be used on the vehicle for repairs and rebuilds of Johnny Joints.

This specific joint is a 2 1/2 O.D.

Johnny Joint rod end; 2 1/2; Weld-on; 2. RockJock Johnny Joint Rod End - CE-9110P-22 x 0.812 mounting width and a .

Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires.

) Upper control arm set;6 lug trucks only;Allows for 80 degrees of articulation;Sealed and greasable joint;Allows for +/- 2 degrees of camber adjustment;0.0 degrees of caster adjustment;Sold as a set;California Residents: WARNING Specialty Products Upper Control Arm Set - 25470 SPC's forged steel design provides the strength and durability needed for the most demanding environments.0 - 4. (Sold in pairs.

Control Arms

1 degree change;Ford changed the axle design in 2005 on their Heavy Duty trucks;These sleeves correct camber and caster on these F250 and F350 Super Duty trucks;Use the 23229 zero degree sleeve to determine the amount of change needed;Adjusts camber and caster;Sold individually;California Residents: WARNING

These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Ford changed the axle design in 2005 on their Heavy Duty trucks. Specality Products 1 Degree Ford Alignment Sleeve for F250-F350 - 23224 Use the 23229 zero degree sleeve to determine the amount of change needed.

Alignment Caster,Camber Kit

Improve suspension travel, handling, and tire wear while you center your tire in the wheel well to maximize clearance for your oversized tires.

Designed, engineered, tested, and assembled in Colorad, SPC Performance's adjustable upper control arms are loaded with the features you need. Equipped with greaseable ball joints and xAxis sealed flex joints in bonded rubber sleeves, this arm will both correct alignment angles and restore factory ride quality.

Control Arms

1 degree change;Ford changed the axle design in 2005 on their Heavy Duty trucks;These sleeves correct camber and caster on these F250 and F350 Super Duty trucks;Use the 23229 zero degree sleeve to determine the amount of change needed;Adjusts camber and caster;Sold individually;California Residents: WARNING

Ford changed the axle design in 2005 on their Heavy Duty trucks.These sleeves correct camber and caster on these F250 and F350 Super Duty trucks.. Specality Products 1 Degree Ford Alignment Sleeve for F250-F350 - 23224 Use the 23229 zero degree sleeve to determine the amount of change needed.

Alignment Caster,Camber Kit