RockJock Narrow Forged Johnny Joint - CE-9116NL-13

Rating :- 9.65 /10

Votes :- 16

NOTES: These are the links that are included in the CE-9900 & CE-9900A TJ/LJ front Antirock sway bar kits.

.8 1/2 link rods; Includes RH/LH heim joints;Hardware;Sold as a pair;California Residents: WARNING RockJock Antirock Sway Bar End Links with Heims (8 1/2" Rods) - CE-99002 Complete set of Antirock sway bar end links includes 8 1/2 link rods that are threaded 1/2-20 RH on one end and 1/2-20 LH on the other end, the corresponding RH and LH 1/2-20 female heim joints with 1/2-20 studs in the ball socket, and also the 2 jam nuts.

Lift Kits,Suspension & Shocks

Body Lifts & Bushings

Sway Bar Link Kit

CAUTION: Jeeps will have more body roll than stock.

. The RockJock Antirock Sway Bar Kit provides balanced performance of front and rear suspension for rugged off-road conditions.This is the same quality used in professional off-road competition.

Lift Kits,Suspension & Shocks

Suspension Accessories

Sway Bar Assemblies

18-Current Wrangler JL, 2 & 4 Door;Johnny Joint adjustable control arms; Complete set of 8;Features Johnny Joint rod ends on both ends;Adjustable length;Direct replacement for stock front upper arms;Heavy wall steel tube construction;California Residents: WARNING

RockJock JL Johnny Joint Adjustable Control Arm Set - CE-9818CA Johnny Joint rod ends offer 30 degrees of overall travel, are urethane bushed, and are fully rebuildable! This is RockJock's complete set of all 8 Johnny Joint adjustable length control arms for the '18 & up Jeep JL Wrangler.

Lift Kits,Suspensions & Shocks

Suspension Accessories

Control Arms

Arms are finished in semi-gloss black powder coat and the forged ends are finished in gold zinc plating.

625 o. 07-18 Wrangler JK, 2 & 4 Door;Black powder coat;. x .

Lift Kits,Suspensions & Shocks

Suspension Accessories

Control Arms

The RockJock Johnny Joint suspension system kit is a complete package that replaces all eight stock control arms and provides a 4 lift.

It is engineered to provide unrivaled articulating flexibility and performance in the most adverse off-road conditions. When used in conjunction with a 1 body lift and a 1 motor mount lift, this kit allows for efficient use of up to 35 tires. Double adjustable upper control arms;Shocks and springs not included;8 adjustable length Johnny Joint control arms;Single adjustable lowers and double adjustable uppers;Johnny Joint adjustable front trac bar and rear trac bar relocation bracket;RockJock Antirock front sway bar;Rear sway bar extended links;RockJock front and rear poly urethane bump stop kits;Max Tire Size: 35x12.

Lift Kits,Suspension & Shocks

Complete Suspension Systems and Lift Kits

1-1/4 inch diameter solid alloy steel;7/8 inch thread tie rod ends;200% stronger than stock;California Residents: WARNING

This unit is rated at 200% stronger than the stock part. RockJock Currectlync Heavy-Duty Tie Rod - Complete - CE-9701TR Sold each.. This is the 1-1/4 diameter solid alloy steel tie rod bar for the RockJock Currectlync heavy duty tie rod system, complete with its heavy duty 7/8 thread tie rod ends, clamps, and dust boots.

Performance Steering Upgrades

Steering Gear Box & Components

Steering Linkage Conversion Kit

Body Type: Forged Steel (Threaded);Body Width: 1.2 inches;Body Series: 2 inch OD, Narrow Body;Thread Size: 7/8 inch, 14 TPI;Thread Direction: Left hand;Shank Length: 2 1/4 inch;Mount Width: 1.600 inches;Hole Diameter: .5625 inch (9/16, 14mm);Misalignment: 28ø Total;Lubrication Method: External zerk fitting located on joint body;Body Finish: Yellow zinc plating;California Residents: WARNING

600 wide ball center with a 9/16 thru bolt hole..

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.365 mounting width offset ball with a .562 thru bolt hole.

25 inch, 12 TPI;Left hand threads;2.25"-12 Left Hand Thread Shank, 2.5 inch OD;Mount width: 2.365 inches;Thread size: 1.

Body Type: Forged Steel (Threaded);Body Width: 1.2 inches;Body Series: 2 inch OD, Narrow Body;Thread Size: 7/8 inch, 14 TPI;Thread Direction: Left hand;Shank Length: 2 1/4 inch;Mount Width: 1.600 inches;Hole Diameter: .5625 inch (9/16, 14mm);Misalignment: 28ø Total;Lubrication Method: External zerk fitting located on joint body;Body Finish: Yellow zinc plating;California Residents: WARNING

600 wide ball center with a 9/16 thru bolt hole..These units are externally greasable via a zerk fitting. RockJock Narrow Forged Johnny Joint - CE-9116NL-13 Finished in gold zinc plating.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.365 mounting width offset ball with a .562 thru bolt hole.

RockJock Narrow 2. Finished in gold zinc plating.365 inches;Thread size: 1.