PSC Steering Large Clevis Joint Kit - SC16

Rating :- 9.72 /10

Votes :- 18

Ford 9;35 spline pinion;Oversize applications;Includes: pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush;1 year warranty against manufacturer defects;California Residents: WARNING

Motor Vehicle Transmission & Drivetrain Parts

Drivetrain & Differential

Performance Axle Components

Differential Pinion Bearing Kit

Yukon Gear & Axle

Ford 9.75;Install 2011 and newer ring & pinion into 08-10;Includes: pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush;1 year warranty against manufacturer defects;California Residents: WARNING

This kit uses Timken bearings and races along with high quality seals and small parts.75-CNV-K Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Motor Vehicle Transmission & Drivetrain Parts

Drivetrain & Differential

Performance Axle Components

Differential Pinion Bearing Kit

Yukon Gear & Axle

Fitting Style: Adapter;Fitting Category: AN to Metric Threads;Fitting Angle: Straight;Fitting Material: Aluminum;Fitting Finish: Zinc;Fitting Attachment 1: Male AN;Fitting Size 1: 6AN;Fitting Attachment 2: Male Inverted Flare;Fitting Size 2: 11/16-18;Swivel: No;Gauge Port: No;O-Rings Included: Yes;California Residents: WARNING

PSC Steering AN Adapter Fitting with 6AN X 11/16-18 Inverted Flare - SF03.

Fittings,Lines & Hardware

Performance Parts

Steering Box Fitting

PSC Steering Rod End Kit for Single Ended Steering Assist Cylinder with 3/4 Rod and 5/8 Male - SCRK2-A

Replacement Rod End Kit for Single Ended Steering Assist Cylinder with 3/4-16 Threaded RodFits:SC2201SC2207SC2222SC2223SC2225 (1) REXFR10-12 chromoly rod end, female-RH, 3/4-16 X 5/8 eyelet;(1) REXMR10 chromoly rod end, male-RH, 5/8-18 X 5/8 eyelet;(4) MB01 weldable mounting tabs;(2) 5/8-18 grade 8 bolts;(2) 5/8-18 nylon locking jam nuts;(1) 5/8-18 jam nut;(1) 3/4-16 jam nut;California Residents: WARNING.

Tie Rod Assemblies & Components

Tie Rod Ends

PSC Steering Assist Cylinders provide the steering power you need to tackle the toughest trails...go where you want to go with PSC!Approximate turning ratios when paired with a Eaton Char-Lynn Steering Control Unit:FHV-CE230: 4.2 turns lock-to-lock.

5 rod diameter;Chromoly steel rods with 3/4-16 threaded ends;Welded, single piece rod/piston construction;6AN high pressure port connections;Wiper seals to prevent contaminant damage and extend service life;Durable powder-coated finish;Grooved non-slip housing;(4) SCCL05KF Steering Cylinder Mounting Clamps with Flat Weld Plates included;California Residents: WARNING PSC Steering Double Ended XD Steering Assist Cylinder - SC2228K1 A massive 3 bore Steering Cylinder with 11Inches of stroke, designed specifically for use with a 5 Ton Rockwell axle combined with tire sizes larger than 46.For use with Full Hydraulic Steering Systems with 5 Ton Rockwell Axle;Double ended, double acting;3.0 bore x 11 stroke x 1..

Replacement Drivetrain,Steering and Suspension Parts

Steering Parts

ZJ Grand Cherokee Replacement Steering

For intermediate to severe duty applications, PSC highly recommends the use of four (4) SCCL04KF Steering Cylinder Mounting Clamps.

4 turns lock-to-lockFHV-CE160: 2.

Hydraulic Steering Assist

Brakes & Steering

Hydraulic Steering

Designed with a female threaded connection to the cylinder rod and 3/4 Inch thru hole to provide a strong pin connection to our TR120HD/XD Tie Rod Kits.

(2) Large Clevis;Anodized coating for maximum corrosion resistance;Large 3/4 Inch bolts for a strong, reliable connection to tie rod assemblies;Hardware Included ;California Residents: WARNING PSC Steering Large Clevis Joint Kit - SC16 These PSC large threaded clevis joints fit all PSC Double Ended Steering Cylinders, setting the off road industry standard for strength and durability..

Steering Kit Hardware

99-06 GM 2500/3500; 4WD;Cold headed 30MM full ball stud - eliminates binding between pitman and idler arm;Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance;Heat treated steel race;Powder metal upper bearing;SAE 1541 forged and heat treated forging with increased size for maximum strength;Relocated grease fitting for easy access;California Residents: WARNING

Cold headed 30MM full ball stud - eliminates binding between pitman and idler arm.

Pitman Arm

Designed with a female threaded connection to the cylinder rod and 3/4 Inch thru hole to provide a strong pin connection to our TR120HD/XD Tie Rod Kits.

Steering Kit Hardware

99-06 GM 2500/3500; 4WD;Cold headed 30MM full ball stud - eliminates binding between pitman and idler arm;Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance;Heat treated steel race;Powder metal upper bearing;SAE 1541 forged and heat treated forging with increased size for maximum strength;Relocated grease fitting for easy access;California Residents: WARNING

PSC Steering 4 Spline Pitman Arm - PA806 Induction through hardened and annealed SAE 4140 stud provides extreme wear resistance.Cold headed 30MM full ball stud - eliminates binding between pitman and idler arm.

Pitman Arm