Synergy Manufacturing Stage 3 Suspension System, 4.5 Inch Lift Kit - 8043-45

S.3/16 inch high strength steel; Heavy duty 3-sided construction; Laser cut and CNC bent 2 and 4-door models;Billet Aluminum;Designed to move the sway bar down 1 inch and back 1-7/16 inch for added clearance when using 8086 JK Rear Long Travel Upper Shock Mount;Can be used in other large diameter shock applications where additional clearance is needed from sway-bar;Bolt on installation can be done with simple hand tools;Made in the U.A;California Residents: WARNING.

A;California Residents: WARNING Synergy Manufacturing Front Sway Bar Quick Disconnect Kit - 8079 Must be used with SYN8059 front sway bar links and one of the following:SYN8081 - JK Front Sway Bar Relocation Kit, SYN8055, SYN8012-13 or SYN8009-01.

28 inch, 1..

07-18 Wrangler JK, 2 & 4 Door;Designed to mimic factory JK upper control arm bracket on any axle;Replace the thin factory brackets on a stock axle or use for switching any axle into a JK;Designed to Will Sold as a pair;Made in the U..S.A;California Residents: WARNING Synergy Manufacturing Weld-On Rear Upper Control Arm Bracket - 8072-03 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.

07-18 Wrangler JK, 2 & 4 Door;Prevents frame side track bar bracket from failing when lifted and running large tires;Prevents excessive deflection of the steering box sector shaft which can result in excessive steering box wear, play, or breakage;Better distributes the increased load on the factory track bar bracket;Added thickness at the track bar bolt prevents the track bar bolt from ovalizing out the stock mount;Bolt-on fix for those who already have an ovalized track bar bracket bolt hole;Maintenance free sealed bearing;Track bar brace laser cut and CNC formed from 1/4 inch high strength steel;Sector shaft brace is CNC machined from high carbon steel then zinc plated;Components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance;100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools;(1) Front track bar brace;(1) Steal sector shaft brace with sealed bearing;(1) Sector shaft pitman arm nut;(1) Hardware kit;California Residents: WARNING Synergy Jeep JK / JKU Front Track Bar and Sector Shaft Brace - 8069-04 Reinforce your front frame side track bar bracket and sector shaft with Synergy's Front Track Bar and Sector Shaft Brace.The Synergy Jeep JK / JKU Front Track Bar and Sector Shaft Brace is designed to better distribute the increased load the frame side track bar bracket encounters on a lifted Jeep and supports the steering box sector shaft from excessive deflection.. A lift and large tires can easily push these components past their capacity.

Offers excellent off-road performance while preserving ride quality;Progressively wound keeps spring from coming unbound at suspension droop;Sold As A Pair;Made in the U.S.A;California Residents: WARNING Synergy Manufacturing Front Lift Coil Springs - 8063-45 Springs are designed to give the advertised amount of lift with use of aftermarket front bumpers & winches.Progressively wound spring eliminates annoying spring clanking found on most suspension kits.

.

S. These lower control arms are designed to take abuse and are fixed length for low maintenance and worry free wheeling.A;California Residents: WARNING Synergy Manufacturing Stage 2 Suspension System, 3 Inch Lift Kit - 8042-30 This system will fit 35 tires with stock fenders or 37 tires with high fenders..

S.5 Inch Lift Kit - 8043-45 This system will fit 37 tires with stock fenders or 40 tires with high fenders. This system also adds Front and Rear Adjustable Track Bars for centering the axles under the vehicle at the increased ride height.

4-door models;Stage 2 key features are front and rear track bar relocation brackets, flipped drag link, and heavy duty fixed length lower control arms;Front and rear bump stop extension kits;Front and rear sway bar links;Front and rear extended stainless steel braided brake lines;100% Bolt-on installation;Made in the U.A;California Residents: WARNING Synergy Manufacturing Stage 2 Suspension System, 3 Inch Lift Kit - 8042-30 This system will fit 35 tires with stock fenders or 37 tires with high fenders. These lower control arms are designed to take abuse and are fixed length for low maintenance and worry free wheeling.The Stage 2 System is the first to include lower control arms and is the first system you'll be comfortable dragging over rocks.