Mountain Off-Road JL Transfer Case Skid Plate (Black) - JLTCSP

Power Stop pads have 20% more stopping power than other leading brands.

Air Cooled: As if the style, the fitment, the adjustability aren't enough -- we have incorporated duct work into each bracket to actively cool the LED pods. Mounting brackets only;Reinforced polycarbonate;Finish: Texturized satin black;Hardware: Stainless steel;Adjustability: +/- 6 degrees;Fog Light Brackets: 2x (One Pair) Morimoto 4Banger (BAF020 / Ford Trucks);Hardware: Complete pack (Stainless Steel);Plug-n-play wiring connection kit;Lights sold separately;California Residents: WARNING. Not here.

Morimoto engineers spent hundreds of hours hands-on in the garage during development of the 4Banger brackets alone. The Morimoto 4Banger HXB Wide Beam sets a new industry benchmark for intensity. Note, your vehicle must have stock fog lights. Other adapter kits for more traditionally-sized LED pods stick out like a sore thumb.

The clamp is zinc plated gold and all hardware is included.

.O.E.R.

Sold in pairs. A thick walled center brace bolts in place with grade 5 hardware.

4-door models;Easy bolt on installation;No drilling required;3/16 inch thick steel;Powder coated black;California Residents: WARNING Mountain Off-Road JL Transfer Case Skid Plate (Black) - JLTCSP Made out of 3/16 plate for serious protection.

Bare steel;Cut out of 7-gauge steel with CNC high definition plasma;Formed on a CNC break;Seams are MIG welded, ground and sanded for a clean appearance;Two eyelets are welded (front to back) for a clevis, or tow bar attachment;California Residents: WARNING Two eyelets are welded (front to back) for a clevis, or tow bar attachment, and there is plenty of flat area for those of you who want to add your own lights or grille/fender protection.

.Some of the factory JL skid plate is more than adequate to do the job, but the transfer case was left exposed and vulnerable from the factory. Easy install and uses factory bolts and no drilling required.

The winch must have feet down style mounting. Their bumpers are cut out of 7 gauge steel with CNC high definition plasma, and then formed on a CNC break. Super strong bumpers which allows a winch to mount as low as possible in it is pocket, and the winch fairlead can bolt on the front face of the bumper. They are shipped bare steel so you can paint it to match your Jeep.