RockJock's Sway Bar End Link Mounting Kit for 2021-up Bronco installs into the hole on the Bronco front lower control arm that the factory sway bar end link is removed from. steel and the locking flange nuts feature 9/16 in.-18 threads.Finish on all components is clear zinc plating. (Included in) 2021-Up Bronco Front Antirock Sway Bar Kits (bolt to lower control arms);Universal use;(2) Billet Steel Sway Bar End Link Mounts (gold);(1) LH Mount Rotational Lock;(2) RH Mount Rotational Lock;(2) 9/16 in.-18 Locking Flanged hex Nuts;Billet End Link Mount Specs.:;1018 Steel Construction;1 1/4 in. wrench;Intended for use on the lower control arms of 2021-up Broncos;California Residents: WARNING wrench, a double-D shaped machined hub that the RH and LH rotational locks fit onto and 9/16 in.-18 RH threads on the bottom.Rotational locks are laser cut and formed 1/8 in. steel bar stock, the mounts include various machined features including bores in the sides of the mounts allow our end link rod ends to bolt up with the rod end nut installed into the bore on the side of the mount, a wrench flat that accepts a 7/8 in. This kit includes the billet steel end link mounts, the RH/LH specific rotational locks and the new nuts to tighten them up with!The bores in the side of the mounts allow our end link rod ends to bolt up with the rod end nut installed into the bore on the side of the mount.Fabricated from 1 1/4 in. Diameter (main body material);3.525 in. Tall;9/16 in.-18 RH Threads 1.50 in. Long;Wrench Flat accepts a 7/8 in.
Lift Kits,Suspensions & Shocks > Suspension Accessories > Sway Bar Link - Non Disconnect
RockJock 4x4 Sway Bar End Link Mount Kit - RJ-281100-101
Specifications of RockJock 4x4 Sway Bar End Link Mount Kit - RJ-281100-101 | |
---|---|
Category | Vehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Suspension Parts |
Instock | instock |
Last Updated