DV8 Offroad Front Winch Bumper (Black) - FBTT2-03

Rating :- 9.54 /10

Votes :- 17

Although these bumpers are made with 3/16 inch steel with 1/4 inch reinforcements throughout, DV8 shaves every pound possible off of the bumper with strategic cutouts and mesh aluminum grills that can be removed and color keyed to the vehicle.

Rear Bumpers

If your model does not have parking sensors, we provide plugs to cover the holes.

It features light mounts for 3-inch LED light pods, so you can light up the trail behind you in dark conditions.The OEM reverse sensors are integrated into the bumper via mounting holes, so you retain full functionality of the feature.

3.5 inch round utility light;Polocarbonate lens;IP68 rated;Flood light;3W Cree Led rated 50,000 hours;16W total;1400 Lumens;3.5 x 3.5 x 1.8 inches;Bottom mounts included;Sold induvidually;California Residents: WARNING

DV8 Offroad Driving LED Light - R3.DV8 Optical Technology and cutting edge design delivers unparalled light output.5E16W3W.

Lighting & Lighting Accessories

Offroad Racing,Fog & Driving Lights

Fog Lights

All tops have carpeted interior and tinted windows.

4-door models;Made with high quality seals, fiberglass, and advanced aerodynamics;Hand laid honeycomb reinforced fiberglass for added durability;2 piece design;Part over the front driver and passenger lifts off like a targa top;Carpeted interior and 31% Tint DOT approved glass;UV stable gel coat - extra thick;Quick release latching system;Improved aerodynamic shape;Rear spoiler lip;Defrost rear windows;Made in the USA;California Residents: WARNING DV8 Offroad Fastback Hard Top - HTJL02-B DV8 Off Road Hard Tops are built in the United States and use high quality seals, fiberglass, and advanced aerodynamics to produce the quietest tops on the market.

Tops & Door Accessories

Hardtops

All of DV8 tops are a 2 piece design so the part over the front driver and passenger lifts off like a targa top.

DV8 Off Road Ranger Hard Tops are built in the United States and use high quality seals, fiberglass, and advanced aerodynamics to produce the quietest tops on the market. 07-18 Wrangler JK, 4-Door;Satin black finish;Two piece design;Square back hard top;Comes with tinted windows;Comes carpeted inside;Hardware included;DV8 3-year limited warranty;Made in the USA;California Residents: WARNING DV8 Offroad Ranger-4 Hard Top (Black) - HT07SB42 This top is a Square Back 2-Piece for 4 Door Wrangler JK Unlimited..

Tops & Door Accessories

Hardtops

This design is meant as an upgrade for the standard JL Wrangler and Gladiator JT hood.

.Prepped with a rust inhibitor ready to be prepped and painted;Come with an under hood insulation liner;Made from stamped steel;Always test fit before painting;California Residents: WARNING DV8 Offroad Rubicon Replica Hood - HDMBJL-TA Constructed from stamped steel offering added strength and reduced weight.

Replacement Parts

Replacement Body Parts

Replacement Hoods

07-13 Toyota Tundra;Textured black finish;3 Piece reinforced design;Made out of 3/16 inch cold rolled steel with 1/4 inch reinforcement where necessary;Has aluminum mesh to allow cold air to permeate the bumper and flow properly to your truck;Features recovery shackles;Can accommodate up to a 12,500 lbs winch;Bumper flows with the body lines;California Residents: WARNING

DV8 Offroad Front Winch Bumper (Black) - FBTT2-03 It is made out of 3/16 inch cold rolled steel with 1/4 inch reinforcement where necessary and has aluminum mesh to allow cold air to permeate the bumper and flow properly to your trucks OEM components.. The DV8 FBTT2-03 is designed to protect your 07-13 Toyota Tundra, it features recovery shackles and can accommodate up to a 12,500 lbs winch.

The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take.

.170 wall stinger;High clearance;Meets with the factory frame;D-Rings included;Will not work with the 2017 Rock Hard Edition Fog Light;California Residents: WARNING Inspired by King of the Hammers style racing and crawling these bumpers are designed to perform on the rocks where you need protection the most. The result is a lighter, stronger bumper that is ready to take on the toughest challenges that you will throw at your Jeep.All of their Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel.

07-13 Toyota Tundra;Textured black finish;3 Piece reinforced design;Made out of 3/16 inch cold rolled steel with 1/4 inch reinforcement where necessary;Has aluminum mesh to allow cold air to permeate the bumper and flow properly to your truck;Features recovery shackles;Can accommodate up to a 12,500 lbs winch;Bumper flows with the body lines;California Residents: WARNING

The DV8 FBTT2-03 is designed to protect your 07-13 Toyota Tundra, it features recovery shackles and can accommodate up to a 12,500 lbs winch.The bumper flows with the body lines of the Tundra perfectly and adds protection to your front end..

The steel thickness of each part of the bumper was chosen to keep strength up and weight down, certain parts of the bumpers are made of 1/4 inch steel while others are made of 3/16 inch steel depending on the amount of abuse that each part is likely to take.

All of their Hammer Forged front bumpers have heavily reinforced winch plates, great approach angles, and are made of thick, high tensile strength steel. DV8 Offroad Hammer Forged Mid-Length Front Bumper - FBSHTB-14 DV8's Hammer Forged front bumpers were designed and built with hardcore wheeling in mind. Some modification may be needed to install on a Wrangler JL and Gladiator JT;Optional LED light bar mounting integrated into the bumper;Mesh insert for running the bumper without an LED;Fog light holes for factory or aftermarket fog lights;Mid-Length for better protection of fender and grill area;.