RockJock 1.25 -12 Left Hand Threaded Jam Nut - CE-9114BJNL

Rating :- 9.62 /10

Votes :- 19

This unit includes the heavy duty trac arm relocation bracket that allows the trac arm to be installed at the proper angle and position.

The heavy duty steel bracket bolts onto the rear axle housing and relocates the trac bar pivot point.. Includes heavy-duty trac arm relocation bracket;Bar is constructed of 1-1/4 inch heavy wall 4130 chrome moly tubing;Features our 2 inch Johnny Joint rod ends at both ends;California Residents: WARNING RockJock Johnny Joint Rear Trac Bar with RockJock Housing Bracket Kit - CE-9123N Bar is constructed of 1-1/4 heavy wall 4130 chrome moly tubing and features our 2 Johnny Joint rod ends at both ends.The Johnny Joint rear trac bar for TJ Wranglers and LJ Unlimited includes all of the same features as RockJocks trail and race proven Johnny Joint front trac bar and is the perfect complementing unit to the front bar to optimize your TJ/LJs articulation.

Motor Vehicle Suspension Parts

Lift Kits,Suspensions & Shocks

Suspension Accessories

Track Bar

The bump stop mount inside the front and rear coil springs and have 'poly' spacers top and bottom.

.They are made with quality polyurethane components and aluminum spacers.

Motor Vehicle Suspension Parts

Lift Kits,Suspension & Shocks

Suspension Accessories

Bump Stops

These units are externally greasable via a zerk fitting.

562" Ball) - CE-9117N Finished in gold zinc plating.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 right hand threads on the shank, and a 2.365 mounting width offset ball with a .562 thru bolt hole.

365 inches;Thread size: 1.5625 inch (9/16, 14mm);Misalignment: 42 degrees total;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.625 mounting width ball with a .640 thru bolt hole.

640 inch;Misalignment: 31 degrees total;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball.25"-12 Left Hand Thread - CE-9114L-28 RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!. Finished in gold zinc plating.

Finished in gold zinc plating.

280 wide ball center with a . Body Type: Forged Steel (Threaded);Body Series: 2.

Jam nut for threaded bung;1.25-12 left hand thread;12 TPI (threads per inch);Sold individually;California Residents: WARNING

25 -12 Left Hand Threaded Jam Nut - CE-9114BJNL. RockJock 1.1 1/4-12 left hand thread jam nut that is included in our CE-9114BL threaded bung kit.

Jam Nuts

Hex shaped - not round - for ease of bar adjustment.

Also included with this bung is a custom machined jam nut that is the same hex size as the bung.

Tubing & Tube Adapters

Tube Adapters

Jam nut for threaded bung;1.25-12 left hand thread;12 TPI (threads per inch);Sold individually;California Residents: WARNING

25 -12 Left Hand Threaded Jam Nut - CE-9114BJNL.

Jam Nuts

Hex shaped - not round - for ease of bar adjustment.

Also included with this bung is a custom machined jam nut that is the same hex size as the bung. Designed to fit into a tube with a 1 1/2 i. Universal Fit;Features 2-1/2 inch of 1-1/4 inch-12 Rh Threads;Fits inside a 1-1/2 inch I.

Tubing & Tube Adapters

Tube Adapters