Advance Adapters GM SM420 10 Spline Transmission To Dana 18/20 Transfer Case Adapter - 50-2402

Found in 1988-2002 Wranglers with the 4 cylinder engine.. Advance Adapters Conversion Bellhousing - 712565 Also check out our conversion clutch components, conversion radiators and In Frame Header Chevy V8 - TJ Wrangler.This bellhousing requires the use of a 153-tooth flywheel and a new external mounted slave cylinder and required is a special 10-1/2 x 1 14 spline clutch disc.

Case length is 12 and adapter is 7. Advance Adapters GM SM465 Transmission To NP231 23 Spline Transfer Case Adapter - 50-9806.

5 to a Dana 300 23 spline. 10.. Advance Adapters GM SM420 Transmission To Dana 300 Transfer Case Adapter - 50-9702 From 1980-86 and will also adapt the same transmission to a NP231 transfer case flush 23 spline from 1987-04 that originally had a 999, 904 or a NV3550 transmission.

.

50? Late model 4L60E automatics will have removable bell housing and a 6 bolt hex pattern rear case. The overall case length of the transmission is 23. Adapts GM 700R4 to Jeep NP231 transfer case;adapter to the Jeep New Process 231 is 1.

This kit adapts GM 700R-4 automatic transmission to Dana Model 300 transfer case. Advance Adapters GM TH700R 2 WD Transmission To Dana 300 Transfer Case Adapter - 50-6303 Kit includes: adapter housing, spud shaft, main shaft, bearing, mounting hardware and instructions.

This adapter assembly will fit any Dana Spicer 18 / 20, Scout version with a 6 tooth female drive gear. The SM420 was used in GM trucks 1947 to 1968 and has a 10 spline output shaft and was used in both 2wd and divorced 4wd applications.

All 300s use a 23 spline input.625 inch in length. The adapter kit includes a two piece adapter, new transmission main shaft with 0.125 inch.

Required Options ADV716001 Large Hole Retainer or ADV716002 Small Hole Retainer, ADV716302 Sealed Bearing Fits Jeep dana 18/20 transfer case;10 spine drive gear;GM SM420;4 speed;Maunal;New SM420 main shaft design;California Residents: WARNING Advance Adapters GM SM420 10 Spline Transmission To Dana 18/20 Transfer Case Adapter - 50-2402 Our kit will include a adapter housing, new transmission main shaft, mount block, gaskets, seal, nylon lock nut, and adapter instructions. The adapter material is 356 T-6 heat treated aluminum alloy, and the adapter has a provision for a transmission mount.50 in length.

625 inch in length.