RockJock 3/4 Inch -16 LH Jam Nut - CE-9112LJN

Rating :- 9.77 /10

Votes :- 16

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 left hand threads on the shank, and a 2.375 mounting width ball with a .718 thru bolt hole.

375 x 0.5 Inch Forged Johnny Joint, 1"-14 Left Hand Thread Shank, 2. RockJock 2.25 inch shank length;Hole diameter: .

The Johnny Joint is 100% rebuildable and field serviceable.

Forged Johnny Joint(R);California Residents: WARNING RockJock Forged Johnny Joint - CE-9113L-12 The forged Jonny Joint is available for the custom suspension builder that needs a high angle joint that does not transmit road noise and clunk.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 right hand threads on the shank, and a 2.365 mounting width ball with a .484 thru bolt hole.

25 inch shank length;Hole diameter: .

All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.

.Narrow Johnny Joint Rebuild Kit;California Residents: WARNING RockJock Narrow Johnny Joint Rebuild Kit - CE-9112NRK Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.

Heim Joint Rebuild Kits

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 left hand threads on the shank, and a 1.850 mounting width ball with a .562 thru bolt hole.

5625 (9/16, 14mm) inch;Misalignment: 30 degrees total;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball.

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1-14 right hand threads on the shank, and a 1.800 mounting width ball with a .625 thru bolt hole.

The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.800 x 0.0 Inch Forged Johnny Joint, 1"-14 Right Hand Thread Shank, 1.25 inch shank length;Hole diameter: .

Silver zinc plated, sold each.

3/4 inch-16 Lh Jam Nut;Universal application;3/4 inch-16 Left Hand, Fine Thread;Zinc Plated;California Residents: WARNING RockJock 3/4 Inch -16 LH Jam Nut - CE-9112LJN 3/4-16 left hand thread jam nut for use on RockJock CE-9112SPL Johnny Joints with treaded shanks, or in any other application that would need a 3/4 jam nut..

Jam Nuts

The tube adapter seals the link off from water or other debris entering the link which can cause damage over time.

. Threaded Bung With Jam Nut;RH Thread;California Residents: WARNING The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal. An integrated drain hole lets any water that enters the threads of the adapter drain out.The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster sleeve.

Motor Vehicle Parts

Tubing & Tube Adapters

Tube Adapters

Silver zinc plated, sold each.

.3/4 inch-16 Lh Jam Nut;Universal application;3/4 inch-16 Left Hand, Fine Thread;Zinc Plated;California Residents: WARNING RockJock 3/4 Inch -16 LH Jam Nut - CE-9112LJN 3/4-16 left hand thread jam nut for use on RockJock CE-9112SPL Johnny Joints with treaded shanks, or in any other application that would need a 3/4 jam nut.

Jam Nuts

The tube adapter seals the link off from water or other debris entering the link which can cause damage over time.

An integrated drain hole lets any water that enters the threads of the adapter drain out.. Threaded Bung With Jam Nut;RH Thread;California Residents: WARNING The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal.

Motor Vehicle Parts

Tubing & Tube Adapters

Tube Adapters