Artec Industries Adjustable Panhard Mount For Axle - BR1032

The 1/4 thick CNC precision cut and formed components of this setup ensure a quality, heavy-duty solution. Artec Industries Raised Track Bar Bracket - BR1139 This bracket attaches to the axle next to the factory coil perch. This heavy bracket is designed to give you a universal track bar mounting option for Dana 60 swap kits, especially those using our Low Profile Dana 60 Front Trusses. This bracket is NOT bolt on and requires welding.

These UCA brackets are intended to mount on the top of our new Low Profile Front Trusses and give you the same style of control arm mounting found on Jeep JK's and TJ's. Artec Industries TJ Weld On UCA Brackets For Low Pro Front Truss - BR1122 Made from 1/4 thick steel and gusseted on the taller mount, these brackets are basically the same as what we've been using on our revolutionary JK and TJ 1 ton swap kits for years.The new trusses have an etched line in the top that acts as a center-line for the joint in this kit and lets you locate it at the correct location and angle (see pic 4).

Artec Industries Lower Link Axle Brackets - BR1077 Below are some of the highlights for this particular bracket that set it apart from all the others.

63 inch joint mounting width;Sold individually;Bare steel;California Residents: WARNING It is CNC cut and bent from 1/4 thick mild steel.

One inch of separation between each hole for adjustability and floating top gusset allows any height frame.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc).

.The style of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop.

Choose your desired orientation: centered on axle or offset to the front edge of the axle.0 axle tube diameter but can be trimmed to fit. Designed for joints that have a 1. For 3.

Designed for joints that have a 1. For 3..Choose your desired orientation: centered on axle or offset to the front edge of the axle.

.

Universal application;Designed for 3 inch axle tube diameters;Centered on tube;Made for 1.Choose your desired orientation: centered on axle or offset to the front edge of the axle.0 axle tube diameter but can be trimmed to fit.