RockJock Narrow 2.0 Inch Weld-On Johnny Joint Rod End, 1.800 X 0.630 Ball - CE-9112NP-16

Rating :- 9.34 /10

Votes :- 15

Can-Am X3 Multi-Mount Kit;For use with Rugged Radios GMR25;Apply the cut template to your center console;Cut along the dotted line;Remove the lower portion;The Multi-Mount plate slips right into its place and is secured with the included two bolts at the top and the factory two bolts at the bottom;Load the Two-way radio and intercom into the insert;Slide the insert into the mount and secure with the included 4 screws;1 yr warranty;California Residents: WARNING

Rugged Radios Can-Am X3 Multi-Mount Kit - MT-X3-MM-25.The Can-Am X3 Multi-Mount System provides a simple and clean installation for your Two-way mobile radio and Rugged intercom system.

This Jeep radio mount allows convenient radio placement on the passenger side of the center console, using the existing factory mounting points.

. The U-bracket (included with your Rugged Radio) attaches directly to the mount using the included mounting hardware.Easily mount your radio in a Jeep JL or JT Gladiator without drilling or cutting! 20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Universal mobile radio mount;Conveniently mounts on passenger side of center console;Black light-textured powder-coating;No drilling or cutting required;Uses factory mounting points;1 yr warranty;California Residents: WARNING Rugged Radios Jeep Mobile Radio Mount - MT-RM-JL Also fits most universal radio mounting brackets.

Simply attach the block off plate to your current radio mount with the (2) included bolts and you're done.

Perfect for those who run an intercom only and plan on adding a radio in the future. Works with: M1 Mounts, RM60 Mounts & GMR45 Mounts;Includes mounting hardware;Powder-coated a textured black;Allows you to cleanly cover the radio mounting hole;1 yr warranty;California Residents: WARNING Rugged Radios Block Off Plate - MT-RM-BLOCK-OFF The block off plate is powder-coated a textured black to match the radio mount.This steel block off plate will allow you to cleanly cover the radio mounting hole in an existing M1, RM60, or GMR45 radio mount for a streamlined look.

Kawasaki Teryx KRX 1000 Multi-Mount Kit;For use with Rugged Radios RDM;Provides a simple and clean installation for your two-way mobile radio and Rugged intercom;Easy installation;Hardware included;1 yr warranty;California Residents: WARNING

The Multi-Mount System for the Kawasaki KRX provides a simple and clean installation for your two-way mobile radio and Rugged intercom.

Perfect for those who run a radio only and plan on adding an intercom in the future.

. Block Off Plate for Intercom Mounts;Powder-coated black;Includes mounting hardware;Will allow you to cover the intercom mounting hole in an existing Rugged Radios Mount for a clean and streamlined look;Works with: MT-CANAM-RM60, MT-DM-RM60, MT-GEN-RM60, MT-XP1-RM60, MT-XP1-RM25WP & MT-YXZ-RM60;1 yr warranty;California Residents: WARNING Rugged Radios Block Off Plate - MT-ICM-BLOCK-OFF The block off plate is powder-coated black for a visually appealing finish. Simply attach the block off plate to your current mount with the (2) included bolts and you're done.

The Johnny Joint is 100% rebuildable and field serviceable.

.Forged Johnny Joint(R);California Residents: WARNING RockJock Forged Johnny Joint - CE-9112SP-11 The forged Jonny Joint is available for the custom suspension builder that needs a high angle joint that does not transmit road noise and clunk.

The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width.

RockJock 2 Inch Johnny Joint - CE-9112P Sold each.

Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball.

This specific joint is a 2 o.630 Ball - CE-9112NP-16 RockJock's narrow weld-on Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!.0 inch OD, narrow body;Mount width: 1.630 thru bolt hole.

The special center ball is heat-treated steel for extra strength, cross-drilled for thru-bolt lubrication, features a 9/16 thru bolt hole, and a 2 5/8 mounting width.

The outer shell is . RockJock 2 Inch Johnny Joint - CE-9112P Sold each.2 inch Johnny Joint Rod End - Externally Greased;Universal Fit;Urethane Bushings;Externally Greased Via Zerk Fitting;Must Be Welded On;Fully Rebuildable;California Residents: WARNING RockJocks Johnny Joints offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint.

Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a high-density urethane bushing that encases the inner ball.

630 inch;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING RockJock Narrow 2. narrow body and features a 1. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.This specific joint is a 2 o.