RockJock Narrow Forged Johnny Joint - CE-9112NL-14

Rating :- 9.65 /10

Votes :- 19

07-18 Wrangler JK, 2 & 4 Door;Rear flares;CNC-bent 1.5 inch diameter tubes covered with 1/8 inch laser cut cold rolled sheet metal;6 inch wide double articulation tube fenders, providing extra 3 inch of suspension travel;Provides extra outer tire clearance for larger tires under full suspension articulation;3/4 inch LED turn signal lights included;Minimal modification for installation;Bolts to OE mounting points;Spacers and brackets included for extra strength;Preserves factory inner liner;Sold as a pair;California Residents: WARNING

Smittybilt XRC Flux Rear Fender Flare Set (Paintable) - 76839.The new XRC flux flares are double-articulated tube fenders that provide extra outer tire clearance for larger tires under full suspension articulation.

Fenders & Flares

Tube Fenders

Smittybilt

Constructed of heavy-duty 2 inchx.120 inch E-coated powder coat steel tube, these side bars are built to take on the roughest terrain.

.07-18 Wrangler JK, 2-Door;Black textured;With perforated filler plate;Heavy-duty 2 inch steel tubing;California Residents: WARNING Smittybilt SRC Rocker Guard (Black) - 76645 The ultimate vehicle protection.

Armor & Protection

Rock Sliders and Guards

Smittybilt

thread rod end.

Threaded Bung;1 1/4 in-12;LH Thread;California Residents: WARNING RockJock Threaded Bung - CE-9114BL1 Also included with this bung is a custom machined jam nut that is the same hex size as the bung.Custom machined weld-in bung for use with forged Johnny Joint rod ends or any other 1in..

Motor Vehicle Parts

Tubing & Tube Adapters

Tube Adapters

The Johnny Joint is 100% rebuildable and field serviceable.

.Forged Johnny Joint(R);California Residents: WARNING RockJock Forged Johnny Joint - CE-9113L-26 The forged Jonny Joint is available for the custom suspension builder that needs a high angle joint that does not transmit road noise and clunk.

All new from RockJock, forged Johnny Joints!!!

5 Inch Forged Johnny Joint with 1 Inch LH Threaded Stud - CE-9113L-14 Units will also accept our 7/16 greaseable thru bolts as well (available separately).

Zinc plated.

Left hand thread.

Jam Nuts

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 left hand threads on the shank, and a 2.975 mounting width ball with a .500 thru bolt hole.

The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.

A RockJock exclusive!

Narrow Forged Johnny Joint;California Residents: WARNING RockJock Narrow Forged Johnny Joint - CE-9112NL-14 Narrow style forged Johnny Joint rod ends feature 40 degrees of overall articulation travel!.

This specific joint is a 2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 3/4-16 left hand threads on the shank, and a 2.975 mounting width ball with a .500 thru bolt hole.

RockJock 2.975 inches;Thread size: 3/4 inch, 16 TPI;Left hand threads;2.25 inch shank length;Hole diameter: .500 Ball - CE-9112SPL-28 RockJock's forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!.