Advance Adapters GM SM465 Transmission To Jeep Dana 18/20 Transfer Case - 50-4703

Manufactured using premium disc blanks mentioned above, the unique wide aperture slots in the EBC sport rotor actually draw cool air under the pad during heavy braking and reduce brake temperatures whilst also helping remove dirt, dust and debris and gasses created by heavy braking from the pad contact area.. EBC Brakes Rotor - GD7286 Blind drilled holes eliminate the chance of rotor cracking which is common with through drilled or completely drilled vent holes.They also improve braking in off road conditions of wet, mud or sand and as such are a great choice for 4x4 vehicles.

These specialty engine mounts from Advanced Adapters will assist you in transplanting a different type of engine in your vehicle will little effort and headache. Advance Adapters Chevy V8 Small Block Engine Mount for Jeep - 713091.

3 / V8 / LS-Series engines to NV4500 5 speed transmission - 712577 Instructions included.Kit includes- one adapter bellhousing, one dust cover plate, one special pilot bearing, one clutch release arm, one ball pivot (installed), one clutch arm boot, and additional mounting hardware. Bellhousing has stock GM bolt pattern and is 6 and 5/15 deep..

0L To CJ7 Series Transmission Conversion Aluminum Bellhousing - 712569 This adapter bellhousing assembly is used to adapt the Jeep 4.0L into a Jeep CJ series. Advance Adapters 4.

This kit requires use of stock GM 168 or 153 tooth car flywheel.Kit fits 1976-79 T-150 (1980-86) SR-4, T-4, T-5, and T-176/177 Jeep CJ transmissions. Transmission requires new 6 cylinder input shaft part #81314.

The adapter is . Will not work with adapter kits that use a 27 or 32 spline input into a Dana 300. Advance Adapters Dana 300 Rotation Kit for AX-15 - 50-8603 Floorboard and shifter modification may be required.

Advance Adapters GM SM465 Transmission To Jeep Dana 18/20 Transfer Case - 50-4703 This new main shaft fits 6 spline drive gears only. We haven't fallen short on this one - a new shorty GM SM465 to Jeep Dana 18/20 adapter kit. To obtain the adapter length of 7/8 inch we had to manufacture a new SM465 main shaft..

. Additional information can be obtained in our on-line catalog, Jeep & Scout Vehicle Section: Transfer Case Information, Jeeps 1941-79. On 2wd transmissions, GM used three different tail housing lengths. the transfer case bore size (3-1/8) small hole or (4) large hole for proper retainer.

We haven't fallen short on this one - a new shorty GM SM465 to Jeep Dana 18/20 adapter kit.

On 2wd transmissions, GM used three different tail housing lengths. The transfer case index to the new adapter will require an index retainer & sealed bearing. These lengths of the tail housing are 6, 9, and 12.850.