Synergy Manufacturing 7/8 Inch Drill Bit For TRE Adapter - 2228379

S.Replaces the hardware and specialized nut tabs that get destroyed from wheeling abuse High strength G9 hardware;Rear Track Bar;Front Track Bar Frame Side;Upper and Lower Control Arm bolts;Includes hardened extra thick washers that will not deform or contort like standard washers;Made in the U.A;California Residents: WARNING.

S.

S.75 Inch Coil Spring Spacer Lift Kit - 8017-075 Synergy Manufacturing products & systems have been designed by real engineers with 10+ years of suspension design & experience in the off road industry.

07-18 Wrangler JK, 2 & 4 Door;Considerably strengthens the stock front upper control arm tower;Can completely replace the stock front upper control arm tower if necessary;Maintenance free Synergy Dual Durometer Bushings reduce Noise, Vibration, and Harshness (NVH);Machined from solid steel in USA;Features OEM sized Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design;California Residents: WARNING Replace the weak stock stamped steel mount that is prone to failure with this solid machined steel mount.

Synergy Manufacturing Heavy Duty Weld-On Front Track Bar Bracket - 8012-13 Weld on tab included for mounting factory or aftermarket steering stabilizer up and out of harms way.

Minimum of 1 tall bump stop spacer is required. Synergy Manufacturing FOX Hi-Mount Stabilizer Relocation Kit - 8007-03-RHD.

Synergy Manufacturing 7/8 Inch Drill Bit for TRE Adapter - 2228379.Steering Correction Kit (8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance.

Synergy Dual Durometer Bushings (DDB) in forged housings have all the benefits of our Dual Durometer Bushings in a forged housing package.625 inch;Bolt size: 9/16 / 14MM;Shank: 1 1/4-12 LH @ 6.. See table for applications and specs.

Steering Correction Kit (8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance. Synergy Manufacturing 7/8 Inch Drill Bit for TRE Adapter - 2228379.

front lower arms);Dual Durometer Bushings (DDB) feature a maintenance free, grease less design;Housings are forged from high strength 1045 steel and treated for corrosion resistance;Control arm bushings are self centering with 30 degrees of misalignment;Outer soft durometer acts as bushing cushion and flex material;Inner hard durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate;Provides for a maintenance free zero bind bushing;Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex;Direct replacement available for Synergy products using a Johnny Joint or rod end;Replacement Bushing: 4320-01;Mounting width: 2.3 degree angle;California Residents: WARNING Synergy Front Lower Short Arm Joint Control Arm Bushing, Frame Side - 4807-01 May be compatible with other products 07-18 Wrangler JK, 2 & 4 Door;Fit Synergy part number 8051 (Adj. See table for applications and specs.