Synergy Front Upper Long Arm Control Arm Bushing - 4804-21

Body Lifts & Bushings

Rating :- 9.41 /10

Votes :- 16

Drag Link fits all JK Wranglers, including those with aftermarket JK axle housings.

5 x .

Performance Steering Upgrades

Steering Gear Box & Components

Drag Links

All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.

6L and 3.S.8L gas engines with either automatic or manual transmissions;Laser cut and CNC formed from 3/16 inch crush resistant Grade 50 A-572 steel plate;Fully boxed construction with internal gusseting provides maximum strength where it counts;Compatible with stock and most aftermarket skid plates;Made in the U.

Lift Kits,Suspension & Shocks

Suspension Accessories

Transmission Crossmember

Flush mount Grade 8 hardware provides a 100% smooth skid surface.

Note: NOT compatible with Diesel models.The crossmember section is required for use of this product. Premium powdercoat finish for maximum corrosion resistance.

Armor & Protection

Skid Plates

Allows access to drain plug without removal; Complete HD Skid Plate System Includes: Oil Pan Skid, Transmission Skid, & Transfer Case Skid Note: Skid Plate system is compatible with Synergy Stage 4 Long Arm Kits and Synergy Long Arm Upgrade Kits.

A;California Residents: WARNING Synergy Manufacturing HD Skid Plate System (Black) - 5709-BK Flush mount Grade 8 hardware provides a 100% smooth skid surface.

Armor & Protection

Skid Plates

Strengthens the factory frame side control arm mount which often get tweaked when wheeling.

Fabrication & Tools

Brackets,Gussets & Tabs

Control Arm Mount

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01

07-18 Wrangler JK, 2 & 4 Door;Synergy frame side front lower control arm gusset kit;Strengthens the factory frame side control arm mounts which often get damaged when wheeling;No cutting of factory mounts necessary;CNC laser cut & bent from high strength 3/16 and 1/8 steel plate;Sold as a pair;California Residents: WARNING.

Fabrication & Tools

Brackets,Gussets & Tabs

Control Arm Mount

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK heavy duty front lower control arm frame bracket;Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling;Laser cut & CNC formed from high strength 3/16 steel;Designed to locate control arms in the factory location;Built in lower skid plate helps to slide over obstacles;California Residents: WARNING.

Suspension Accessories

Coil Spring Mounting Kit

May be compatible with other products 03-13 Dodge Ram 2500 4x4;03-12 Dodge Ram 3500 4x4;06-08 1500 Megacab 4x4;For Synergy control arms 8585;Dual Durometer Bushings (DDB) feature a maintenance free, grease less design;Housings are forged from high strength 1045 steel and treated for corrosion resistance;Control arm bushings are self centering with 30 degrees of misalignment;Outer soft durometer acts as bushing cushion and flex material;Inner hard durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate;Provides for a maintenance free zero bind bushing;Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex;Direct replacement available for Synergy products using a Johnny Joint or rod end;Replacement Bushing:4322-01;Mounting width: 2.32 inch;Bolt size: 9/16 -14mm;Shank: 1 1/4-12 LH;California Residents: WARNING

These are available for all Synergy products that use a Johnny Joint or rod end..

Leaf Spring Bushings & Pads

Body Lifts & Bushings

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

Suspension Accessories

Coil Spring Mounting Kit

May be compatible with other products 03-13 Dodge Ram 2500 4x4;03-12 Dodge Ram 3500 4x4;06-08 1500 Megacab 4x4;For Synergy control arms 8585;Dual Durometer Bushings (DDB) feature a maintenance free, grease less design;Housings are forged from high strength 1045 steel and treated for corrosion resistance;Control arm bushings are self centering with 30 degrees of misalignment;Outer soft durometer acts as bushing cushion and flex material;Inner hard durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate;Provides for a maintenance free zero bind bushing;Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex;Direct replacement available for Synergy products using a Johnny Joint or rod end;Replacement Bushing:4322-01;Mounting width: 2.32 inch;Bolt size: 9/16 -14mm;Shank: 1 1/4-12 LH;California Residents: WARNING

. Synergy Front Upper Long Arm Control Arm Bushing - 4804-21 See table for applications and specs.

Leaf Spring Bushings & Pads

Body Lifts & Bushings