reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Vehicles & Parts
Vehicle Parts & Accessories
Motor Vehicle Parts
Motor Vehicle Suspension Parts
Lift Kits,Suspensions & Shocks
Suspension Accessories
Coil Spring Mounting Kit
Synergy Manufacturing

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

About The 07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK heavy duty front lower control arm frame bracket;Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling;Laser cut & CNC formed from high strength 3/16 steel;Designed to locate control arms in the factory location;Built in lower skid plate helps to slide over obstacles;California Residents: WARNING

07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK heavy duty front lower control arm frame bracket;Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling;Laser cut & CNC formed from high strength 3/16 steel;Designed to locate control arms in the factory location;Built in lower skid plate helps to slide over obstacles;California Residents: WARNING

Lift Kits,Suspensions & Shocks > Suspension Accessories > Coil Spring Mounting Kit

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

May be compatible with other products 03-13 Dodge Ram 2500 4x4;03-12 Dodge Ram 3500 4x4;06-08 1500 Megacab 4x4;For Synergy control arms 8585;Dual Durometer Bushings (DDB) feature a maintenance free, grease less design;Housings are forged from high strength 1045 steel and treated for corrosion resistance;Control arm bushings are self centering with 30 degrees of misalignment;Outer soft durometer acts as bushing cushion and flex material;Inner hard durometer lining acts as the bearing surface to allow free floating inner sleeve to rotate;Provides for a maintenance free zero bind bushing;Internal bushing ring separates inner and outer materials to prevent inner sleeve gaping at extreme flex;Direct replacement available for Synergy products using a Johnny Joint or rod end;Replacement Bushing:4322-01;Mounting width: 2.32 inch;Bolt size: 9/16 -14mm;Shank: 1 1/4-12 LH;California Residents: WARNING
Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01
More from 07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK Heavy Duty Front Lower Control Arm Frame Bracket;Replaces The Weak Factory Front Lower Control Arm Mounts On The Frame Which Often Get Destroyed From Wheeling;Laser Cut & CNC Formed From High Strength 3/16 Steel;Designed To Locate Control Arms In The Factory Location;Built In Lower Skid Plate Helps To Slide Over Obstacles;California Residents: WARNING - Synergy Manufacturing
Search

Lift Kits,Suspensions & Shocks > Suspension Accessories > Coil Spring Mounting Kit

Specifications of Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

CategoryVehicles & Parts > Vehicle Parts & Accessories > Motor Vehicle Parts > Motor Vehicle Suspension Parts
Instockinstock

Last Updated

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021
More Varieties
Vehicles & Parts
Vehicle Parts & Accessories
Motor Vehicle Parts
Lift Kits,Suspensions & Shocks
Suspension Accessories

Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021
Rating :- 9.12 /10
Votes :- 17
Synergy Steering Correction Kit (8011) requires the drag link to be flipped to the top of the steering knuckle for increased ground clearance and to correct steering geometry on lifted Jeep JKs JK models;Adapter is designed to flip the taper on the steering knuckle;Eliminates the need for reaming the knuckle to the correct taper;CNC machined from 303 stainless steel;Designed only to be used with 4131-L tie rod end;Sold Individually;California Residents: WARNING
  • Hardware
  • Tools
  • Fabrication & Tools
  • Hand Tools
  • Drill Bits
  • Synergy Manufacturing
    • Drag Link fits all JK Wranglers, including those with aftermarket JK axle housings.

    Drag Link fits all JK Wranglers, including those with aftermarket JK axle housings.

    Offers a more direct connection to the road/trail compared to stock - no more bent drag links and constantly having to re-center your steering wheel.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Performance Steering Upgrades
  • Steering Gear Box & Components
  • Drag Links
  • Synergy Manufacturing
    • All Synergy products are designed with the use of the latest CAD engineering software to ensure the highest level of fit, finish, and performance.
  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Suspension Parts
  • Lift Kits,Suspension & Shocks
  • Suspension Accessories
  • Transmission Crossmember
  • Synergy Manufacturing
    • Flush mount Grade 8 hardware provides a 100% smooth skid surface.

    Flush mount Grade 8 hardware provides a 100% smooth skid surface.

    The crossmember section is required for use of this product.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Armor & Protection
  • Skid Plates
  • Synergy Manufacturing
    • Allows access to drain plug without removal; Complete HD Skid Plate System Includes: Oil Pan Skid, Transmission Skid, & Transfer Case Skid Note: Skid Plate system is compatible with Synergy Stage 4 Long Arm Kits and Synergy Long Arm Upgrade Kits.
  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Armor & Protection
  • Skid Plates
  • Synergy Manufacturing
    • Strengthens the factory frame side control arm mount which often get tweaked when wheeling.

    Strengthens the factory frame side control arm mount which often get tweaked when wheeling.

    .S.A;California Residents: WARNING Synergy Manufacturing Frame Side Rear Lower Control Arm Gusset Kit - 5022-02 Synergy frame side rear lower control arm gusset kit is CNC laser cut and bent from high strength 3/16 steel.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Fabrication & Tools
  • Brackets,Gussets & Tabs
  • Control Arm Mount
  • Synergy Manufacturing
    • Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01

    Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01

    07-18 Wrangler JK, 2 & 4 Door;Synergy frame side front lower control arm gusset kit;Strengthens the factory frame side control arm mounts which often get damaged when wheeling;No cutting of factory mounts necessary;CNC laser cut & bent from high strength 3/16 and 1/8 steel plate;Sold as a pair;California Residents: WARNING.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Fabrication & Tools
  • Brackets,Gussets & Tabs
  • Control Arm Mount
  • Synergy Manufacturing
    • Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

    Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

    07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK heavy duty front lower control arm frame bracket;Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling;Laser cut & CNC formed from high strength 3/16 steel;Designed to locate control arms in the factory location;Built in lower skid plate helps to slide over obstacles;California Residents: WARNING.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Suspension Parts
  • Lift Kits,Suspensions & Shocks
  • Suspension Accessories
  • Coil Spring Mounting Kit
  • Synergy Manufacturing
    • Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01

    Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Gusset Kit - 5022-01

    07-18 Wrangler JK, 2 & 4 Door;Synergy frame side front lower control arm gusset kit;Strengthens the factory frame side control arm mounts which often get damaged when wheeling;No cutting of factory mounts necessary;CNC laser cut & bent from high strength 3/16 and 1/8 steel plate;Sold as a pair;California Residents: WARNING.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Fabrication & Tools
  • Brackets,Gussets & Tabs
  • Control Arm Mount
  • Synergy Manufacturing
    • Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

    Synergy Manufacturing Jeep JK Frame Side Front Lower Control Arm Bracket Kit - 5021

    07-18 Wrangler JK, 2 & 4 Door;Synergy Jeep JK heavy duty front lower control arm frame bracket;Replaces the weak factory front lower control arm mounts on the frame which often get destroyed from wheeling;Laser cut & CNC formed from high strength 3/16 steel;Designed to locate control arms in the factory location;Built in lower skid plate helps to slide over obstacles;California Residents: WARNING.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Suspension Parts
  • Lift Kits,Suspensions & Shocks
  • Suspension Accessories
  • Coil Spring Mounting Kit
  • Synergy Manufacturing