Artec Industries Coilover Tabs For Truss - TB1008

DO NOT WELD ASSEMBLED JOINTS.

These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again. HD lower control arm brackets - sold as a pair;Made from 1/4 thick boxed steel plate for strength and impact resistance;Normal 1/2 bolt hole version;2. Its no surprise since they are practically made of sheet-metal.

1997 to 2006 TJ Wrangler, Rubicon and Unlimited;GM 14-bolt 1-tom rear axle;3/8 thick truss top and 1/4 thick truss gussets and 1/4 thick brackets for much higher strength than the factory bracket;Includes all the brackets necessary for a complete axle swap including upper and lower control arm mounts, shock mounts, and coil spring mounts;Eliminates the trackbar by using triangulated upper control arms;High-Clearance Shock mounts flip bolt orientation to perpendicular to axle tube providing more rotation without binding;California Residents: WARNING Artec Industries Triangulated 14-Bolt 1-Ton Swap Kit with Truss - TJ1414 He also offer this kit with a HIGH CLEARANCE option that raises the LCA and shock brackets above the bottom of the axle tube.Artec Industries is excited to announce the Triangulated TJ GM 14-bolt Axle Swap Kit..

Wanna get them out of the way so you can work more efficiently? Artec Industries Wall Accessory Hanger for Jig Table - TC2011 This Wall Accessory Hanger allows you to hang your Jig Table Accessories on the wall out of the way when not in use. Love all your Jig Table accessories so much that you have too many?.

This Nut Strip allows you to quickly and easily thread 1/2 inch bolts directly from the top.Our mission is to provide world class aftermarket automotive parts to off-road enthusiasts. Want to bolt something to the Jig Table but don't want to have to wrench from both the top and bottom?.

Features:CNC Fiber Laser Cut and precision CNC Bent from 16 gauge steel for a lightweight yet robust solutionUses Jig Table's original Quickslot system to allow quick and easy install and removal3. The Tool Tray uses the Jig Table's Orignal Quickslot system to add simple storage to the side of your table.

Includes 4 pieces for use with two shocks. Artec Industries Coilover Tabs for Truss - TB1008 These tabs allow you to mount your shocks or coilovers near the very ends of your axle for maximum stability.. Made from 1/4 inch thick mild steel;1/2 inch hole;Includes 4 pieces for use with 2 shocks;Bare steel;California Residents: WARNING They are intended for use with our Front Dana 60 truss - bridging the gap between the inner c and the truss, reinforcing the entire axle against bending or breaking.

Artec Industries 3/4 Inch High Misalignment Spacers - SP1201.Includes 2 misalignment spacers for one rod end.

Made from CNC cut 1/4 thick mild steel, these tabs are a great addition to your truss system. Includes 4 pieces for use with two shocks.. Made from 1/4 inch thick mild steel;1/2 inch hole;Includes 4 pieces for use with 2 shocks;Bare steel;California Residents: WARNING They are intended for use with our Front Dana 60 truss - bridging the gap between the inner c and the truss, reinforcing the entire axle against bending or breaking.

Artec Industries 3/4 Inch High Misalignment Spacers - SP1201.