RockJock 2.5 Inch Forged Johnny Joint, 1.25-12 Left Hand Thread Shank, 2.590 X 0.718 Ball - CE-9114L-20

Rating :- 9.09 /10

Votes :- 15

Front;3-3/4 diameter;2 tall;Mount to bottom coil bucket;Fits 2-4 lifts;California Residents: WARNING

RockJock Urethane Front Bumpstop Puck (Large) - CE-9122F4.This is the 3 3/4 diameter x 2 tall urethane bump stop puck from the RockJock CE-9122F TJ/LJ/XJ/MJ front and CE-9122R TJ/LJ rear bump stop kits.

Motor Vehicle Suspension Parts

Motor Vehicle Parts

Lift Kits,Suspensions & Shocks

Suspension Accessories

Bump Stops

Gold zinc plated, sold each.

.Jam nut for Johnny Joints;7/8-14 right hand thread;14 TPI (threads per inch);Gold zinc plated;Sold individually;California Residents: WARNING RockJock 7/8 - 14 Right Hand Threaded Jam Nut - CE-9116JN 7/8-14 right hand thread jam nut for use on RockJock Johnny Joints with treaded shanks, or in any other application that would need a 7/8 jam nut.

Jam Nuts

Threaded bung;7/8-14 left hand thread;Hex shaped;Designed to fit 1.25 inch ID tube;Sold individually;California Residents: WARNING

d. RockJock 7/8" -14 Left Hand Threaded Bung - CE-9116BL1 Designed to fit into a tube with a 1 1/4 i.Hex shaped - not round - for ease of bar adjustment.

Motor Vehicle Parts

Tubing & Tube Adapters

Tube Adapters

Threaded bung;7/8-14 right hand thread;Hex shaped;Designed to fit 1.25 inch ID tube;Sold individually;California Residents: WARNING

RockJock 7/8" -14 Right Hand Threaded Bung - CE-9116B1 Designed to fit into a tube with a 1 1/4 i.

Motor Vehicle Parts

Tubing & Tube Adapters

Tube Adapters

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 right hand threads on the shank, and a 2.625 mounting width offset ball with a .640 thru bolt hole.

625 x 0.25 inch, 12 TPI;Right hand threads;2.365 inches;Thread size: 1.25"-12 Right Hand Thread Shank, 2.

Silver zinc plated, sold each.

.25 jam nut.25 inch-12 Left Hand, Fine Thread;Zinc Plated;California Residents: WARNING RockJock 1.

Jam Nuts

Forged Johnny Joint rod ends feature forged steel construction, a 1 1/4-12 left hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.812 wide ball center with a .750 thru bolt hole).

750 Hole x 2. Forged Joint;1 1/4 in. These units are externally greasable via a zerk fitting.5 in.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.590 mounting width ball with a .718 thru bolt hole.

5 Inch Forged Johnny Joint, 1.718 inch;Lubrication method: external zerk fitting located on joint body;Sold individually;California Residents: WARNING Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. Finished in gold zinc plating.

Forged Johnny Joint rod ends feature forged steel construction, a 1 1/4-12 left hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.812 wide ball center with a .750 thru bolt hole).

Left Hand Thread; . Finished in gold zinc plating. These units are externally greasable via a zerk fitting. Forged Joint;1 1/4 in.

This specific joint is a 2 1/2 diameter, fitted with a zerk fitting for greasing, 2 1/4 of 1 1/4-12 left hand threads on the shank, and a 2.590 mounting width ball with a .718 thru bolt hole.

The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. Body type: forged steel;Body series: 2.