Dynatrac Free-Spin Kit 2012-2018 Dodge 2500 And 3500 With DynaLoc Hubs - CR60-3X1104-L

Rating :- 9.24 /10

Votes :- 17

Tongue Weight;Black Finish;California Residents: WARNING

These all steel construction drop ball mounts are available in different amounts of drop to fit your lifted truck to trailer perfectly and have a high tow rating to get the job done safely.. DrawTite Class III/IV Ball Mount (Black) - 2736 GTW / 500 lbs.Class III/IV;Ball Mount;5000 lbs.

Drop Hitches & Ball Mounts

Towing

Trailer Hitch Ball Mount

DrawTite

Gross Total Weight;200 lbs.

.Class I;Sportframe;Trailer Hitch;Rear;2000 lbs.

4.88 ratio;Eaton E-Lockers;Dynatrac-exclusive patented ProRock nodular-iron, high-pinion ProRock 62 centersection;Best-in-class ground clearance and more ground clearance than a factory Dana 44;U.S.-made forged, double heat-treated 1480 35-spline, 1-ton axleshaft assemblies;Dynatrac HD BallJoints;Dynatrac HD tie rod, 4140 heat-treated steering arm;Rear axle includes Dynatrac 14-inch brake upgrade with single-piston calipers;Dynatrac HD mechanical parking brake with adapters for stock JK parking-brake cable attachment;Both front and rear axles are 68.5 inches wide and have 8 on 6.5 wheel bolt pattern;California Residents: WARNING

Complete Axles & Third Members

Complete Axle Assemblies

07-18 Wrangler JK, 2 & 4 Door;Does not fit Rubicon models;Dana 44 rear axle;35 spline shaft;5x5 and 5x5.5 bolt patterns;New carrier required - sold separately;Includes tone ring;New wheel studs, bearings and seals are included;Made in the USA;California Residents: WARNING

This rear JK44 Axleshaft Upgrade Kit increases the shaft diameter to from 32- to 35-spline.

Axle Upgrade Kits

We engineered this ProRock 44 as a direct replacement housing for 2007-2018 Jeep Wrangler JK front axles, replacing the factory Dana 44, addressing the critical areas that fail when larger tires are installed and the vehicle is used regularly off-road.

5 inch Overall Width;1/2 inch Wall HD Tube: Extra Caster For Lifted Applications;Requires Use Of Rubicon Style Axle Shafts;Reuses JK Knuckles Out;California Residents: WARNING Dynatrac JK Rubicon Pro Rock Dana 44 Front Unlimited Axle Housing with Pro Steer Ball Joints - JK44-1X3010-K The Dynatrac ProRock 44 front axle offers incredible strength and unmatched ground clearance.JK Rubicon Front Axle Housing Kit;Pro Rock 44 Center Section;Machined For Rubicon Tru-Lok Electric Locker Only;Includes Pro Steer Ball Joints;65..

Complete Axles & Third Members

Complete Axle Assemblies

Free-Spin Hub Conversion Kits include these features: heat-treated chromoly spindles;Top-quality bearings and seals;35-spline, 1.50-inch outer shafts;Wheel hubs;DynaLoc locking hubs;All necessary studs and hardware;Dynatrac Free-Spin Hub Conversion Kits are the only 100-percent U.S.-made kits available;NOTE: Trucks with dual rear wheels will require the use of a special dually wheel adapter.

These parts have been made to work specifically with Dynatrac's Free-Spin kit.;California Residents: WARNING This kit includes is for trucks with fine wheel studs. These can be purchased through Arrowcraft (248-280-0210).This kit includes DynaLoc locking hubs, providing improved locking hub function, greater strength and a shorter profile for better clearance that reduces the chance of hub impacts on the trail.

Hub Conversions

Ball joint installation kit makes installation of the Dynatrac HD ball joints easier; The installation kit provides a safer way to press in the balljoints at home or in a shop without damaging the new ball joints;This kit is for use with DA60-2X3050-A, DA60-2X3050-E and FO2W-2X3050-A ball joint sets for 1994-1999 Dodge 2500 and 3500 4x4 and Ford E-250 and E-350 van applications.;California Residents: WARNING

Dynatrac Installation Kit for DA60-2X3050 and FO2W-2X3050-A Ball Joint Sets - DA60-1X3050-C.

Axle Ball Joints

This kit includes DynaLoc locking hubs, providing improved locking hub function, greater strength and a shorter profile for better clearance that reduces the chance of hub impacts on the trail.

;California Residents: WARNING Dynatrac Free-Spin Kit 2012-2018 Dodge 2500 and 3500 with DynaLoc Hubs - CR60-3X1104-L These can be purchased through Arrowcraft.50-inch outer shafts;Wheel hubs;DynaLoc hubs;All necessary studs and hardware;Dynatrac Free-Spin Hub Conversion Kits are the only 100-percent U.The Dynatrac Free-Spin Heavy-Duty Hub Conversion Kit for 2012-2018 Dodge 2500 and 3500 trucks is designed to replace the factory unit bearings with fixed spindles for superior strength, and smooth performance..

Hub Conversions

Ball joint installation kit makes installation of the Dynatrac HD ball joints easier; The installation kit provides a safer way to press in the balljoints at home or in a shop without damaging the new ball joints;This kit is for use with DA60-2X3050-A, DA60-2X3050-E and FO2W-2X3050-A ball joint sets for 1994-1999 Dodge 2500 and 3500 4x4 and Ford E-250 and E-350 van applications.;California Residents: WARNING

Dynatrac Installation Kit for DA60-2X3050 and FO2W-2X3050-A Ball Joint Sets - DA60-1X3050-C.This Dynatrac installation kit makes installation of the Dynatrac HD ball joints easier, This kit is for use with DA60-2X3050-A, DA60-2X3050-E and FO2W-2X3050-A ball joint sets for 1994-1999 Dodge 2500 and 3500 4x4 and Ford E-250 and E-350 van applications.

Axle Ball Joints

This kit includes DynaLoc locking hubs, providing improved locking hub function, greater strength and a shorter profile for better clearance that reduces the chance of hub impacts on the trail.

50-inch outer shafts;Wheel hubs;DynaLoc hubs;All necessary studs and hardware;Dynatrac Free-Spin Hub Conversion Kits are the only 100-percent U.-made kits available;NOTE: Trucks with dual rear wheels will require the use of a special dually wheel adapter.

Hub Conversions