Artec Industries Adjustable Panhard Mount For D60 Truss - BR1026

.

The bend strengthens the mount so no additional reinforcement is needed. Please note this requires welding and general fabrication.

No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.

One inch of separation between each hole for adjustability and floating top gusset allows any height frame. 2.625 mounting width with 9/16 bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc).

.

For 3. Universal application;Designed for 3 inch axle tube diameters;Centered on tube;Made for 1. It offer three holes at 5, 6, and 7 inches from axle centerline to allow you to fine tune your suspension..

It offers three holes at 7, 8, and 9 inches from axle centerline to allow you to fine tune your suspension.75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers. Designed for joints that have a 1. Welding required for installation.

2. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.

75 mounting width such as 3/4 and 7/8x3/4 rod ends with high misalignment spacers..

Universal application;Upper and lower frame mounts;Made from 1/4 inch thick mild steel;2. Artec Industries Dual 4-link Bracket - BR1013 Skid plate design does not restrict movement of joint.