J.E. Reel 1310 Replacement Rear Drive Shaft - 31JK-OE-2R

Rating :- 9.49 /10

Votes :- 18

Upgrade the suspension on your Jeep Wrangler JL or Gladiator JT by installing Quicker Disconnect adjustable Sway Bar Links.

Fits 0 to 2 lifts and is sold in pairs, Quicker Disconnects are powder coated and Made in the USA.0 Lift Only;Includes a pair of frame mounted retention brackets to keep the links and sway bar in place when disconnected;Gain up to 30 percent more axle articulation by disconnecting your front sway bar;Dramatically improve off-road performance on stock or modified Jeeps;Variable length design adapts to your vehicle and future modifications;Convenient grease fittings ensure easy bushing lubrication for smooth, silent operation;Stainless tapered mounting posts and self-align bushings allow you to connect or disconnect on unlevel surfaces;Spherical bushings provide unrestricted 360 degrees of rotation and 11 degrees of misalignment capability;California Residents: WARNING JKS Manufacturing Quicker Disconnect Sway Bar Links (0-2" Lift) - JKS2032 Quick-release pins make it easy to decouple and reconnect your front sway bar. You won't find a more user-friendly or higher quality design for your JK or JL Jeep..

Lift Kits,Suspensions & Shocks

Sway Bar Link - Disconnect

They install in the OE mounting locations for 0-4.5 of lift.

J-Link arms offer improved strength and performance while correcting front caster on lifted applications.250-wall DOM tubing. JKS Manufacturing Rear Lower Fixed Length Control Arms - JKS1671.

Lift Kits,Suspensions & Shocks

Control Arms

At the frame-side mount, J-Flex arms incorporate a unique hex-shaped threaded bung for easy adjustment of the forged flex end and 1-1/4-12 threads jam nut Flex end design allows for 30-degrees of misalignment (15 in either direction) for impressive articulation and are greaseable to ensure long bushing life.

JKS Manufacturing Adjustable Rear Upper Control Arms - JKS1667 Sold in pairs.20-Current Gladiator JT;Improved strength and performance with 2 OD .250-wall DOM construction;Adjustable length to dial in rear axle position and pinion angle at a wide range of lift heights (0-4.250-wall DOM tubing for a massive improvement to factory arms that won't let you down out on the trail.

Lift Kits,Suspensions & Shocks

Control Arms

At the frame-side mount, J-Flex arms incorporate a unique hex-shaped threaded bung for easy adjustment of the forged flex end and 1-1/4-12 threads jam nut Flex end design allows for 30-degrees of misalignment (15 in either direction) for impressive articulation and are greaseable to ensure long bushing life.

99-04 Jeep Grand Cherokee WJ;Built from 2 OD x .

Lift Kits,Suspension & Shocks

Control Arms

This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle.

Wrangler JL, 2-Door;Rear driveshaft;8 speed automatic transmission;Rear axle;M220/Dana 44;California Residents: WARNING J.. Maximum Angle 1310 C.

It is best to measure all drivelines if possible.

E.E. Reel 1350 OE Replacement Rear Drive Shaft (Automatic Transmission) - 3518JL-4R This is especially important to consider on the 2018 model JL.

07-18 Wrangler JK, 2-Door;All hardware included;California Residents: WARNING

J. The J. Reel 1310 Replacement Rear Drive Shaft - 31JK-OE-2R Designed to be used on JKs running tires up to 35 for mild use..

This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle.

07-18 Wrangler JK, 2-Door;All hardware included;California Residents: WARNING

J..

This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle.

4-door models;Rear driveshaft;6 speed manual transmission;Rear axle;M200/Dana 35;Select Trac full time;California Residents: WARNING J. Reel 1310 Rear Drive Shaft for M200/Dana 35 (6 Speed Manual Transmission) - 3118JL-4RMFT Note: JL 2018 Powertrain is installed at 9.