J.E. Reel 1350 OE Replacement Rear Drive Shaft (Automatic Transmission) - 3518JL-4R

Rating :- 9.18 /10

Votes :- 18

Using heavy-duty 1/4 steel plate construction, the low-profile design allows you to add protection for your lower control arms with the added benefit of a significant strength upgrade to the factory bracket design.

.Spans OE bracket to form a much stronger boxed structure;Ultra-protective design utilizes thick 1/4 plate steel construction that is folded for extra rigidity and proper clearance;California Residents: WARNING JKS Manufacturing Control Arm Skid Plate - JKSOGS115 These MiniSkids are specifically designed for the front axle of the Jeep JK and will work with both factory and aftermarket control arms.

Armor & Protection

Skid Plates

Upgrade the suspension on your Jeep Wrangler JL or Gladiator JT by installing Quicker Disconnect adjustable Sway Bar Links.

Easily disconnect your sway bars when you hit the trail and need additional articulation.. 18-Current Wrangler JL, 2 & 4 Door;20-Current Jeep Gladiator JT;Fits vehicles with 0-2.

Lift Kits,Suspensions & Shocks

Sway Bar Link - Disconnect

They install in the OE mounting locations for 0-4.5 of lift.

250-wall DOM tubing;Premium Clevite(R) rubber bushings preinstalled;Durable gloss black powder coat finish;California Residents: WARNING Both ends of these arms feature pre-installed premium OE style rubber bushings to absorb noise and reduce vibrations for a comfortable, quiet ride. The arms are built right here in the USA from 2 OD x .250-wall DOM tubing.

Lift Kits,Suspensions & Shocks

Control Arms

At the frame-side mount, J-Flex arms incorporate a unique hex-shaped threaded bung for easy adjustment of the forged flex end and 1-1/4-12 threads jam nut Flex end design allows for 30-degrees of misalignment (15 in either direction) for impressive articulation and are greaseable to ensure long bushing life.

At the axle mount, J-Flex arms feature premium OE style rubber bushings to absorb noise and reduce vibrations for a comfortable, quiet ride and maintenance-free operation. When the time comes, JKS flex ends are rebuildable. J-Flex arms are built from heavy duty 2 OD x .

Lift Kits,Suspensions & Shocks

Control Arms

At the frame-side mount, J-Flex arms incorporate a unique hex-shaped threaded bung for easy adjustment of the forged flex end and 1-1/4-12 threads jam nut Flex end design allows for 30-degrees of misalignment (15 in either direction) for impressive articulation and are greaseable to ensure long bushing life.

At the axle mount, J-Flex arms feature premium OE style rubber bushings to absorb noise and reduce vibrations for a comfortable, quiet ride and maintenance-free operation.

Lift Kits,Suspension & Shocks

Control Arms

This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle.

E.V.Less than 26 degrees and 1350 C.

It is best to measure all drivelines if possible.

Note: JL 2018 Powertrain is installed at 9.E.25 degrees.

07-18 Wrangler JK, 2-Door;All hardware included;California Residents: WARNING

E. Reel 1310 Replacement Rear Drive Shaft - 31JK-OE-2R Designed to be used on JKs running tires up to 35 for mild use.E.

It is best to measure all drivelines if possible.

4-door models;Rear driveshaft;Automatic transmission;Recommended for stock to 2 1/2 lift;Up to 33 tires for mild use;Pinion yoke;Transfer case yoke;Retaining hardware;California Residents: WARNING J.E.E..

07-18 Wrangler JK, 2-Door;All hardware included;California Residents: WARNING

1310 series heavy duty drive shaft upgrades your driveline to accommodate the stress of larger tires. Reel 1310 Replacement Rear Drive Shaft - 31JK-OE-2R Designed to be used on JKs running tires up to 35 for mild use.