reorder
ALWAYS Be Happy search home
c
Combo Blog
Categories
Play Games New
Vehicles & Parts
Vehicle Parts & Accessories
Armor & Protection
Skid Plates
Artec Industries

Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599

About The Wrangler JL, 2 & 4 Door;Fits over the OEM LCA bracket;Integrated skid plate on the bottom of the bracket;3/16 thick boxed steel plate;California Residents: WARNING.These heavy-duty skid plates protect and beef up the factory brackets so you'll never have to worry about damaging the OEM bracket. Protect it before it gets damaged

These heavy-duty skid plates protect and beef up the factory brackets so you'll never have to worry about damaging the OEM bracket. Protect it before it gets damaged. Wrangler JL, 2 & 4 Door;Fits over the OEM LCA bracket;Integrated skid plate on the bottom of the bracket;3/16 thick boxed steel plate;California Residents: WARNING

Armor & Protection > Skid Plates

Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599

Armor & Protection > Skid Plates

Specifications of Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599

CategoryVehicles & Parts > Vehicle Parts & Accessories
Instockinstock

Last Updated

Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599
More Varieties
Vehicles & Parts
Armor & Protection

Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599
Rating :- 9.56 /10
Votes :- 19
A high-clearance aftermarket tie rod is required (see notes below).
  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Transmission & Drivetrain Parts
  • Drivetrain & Differential
  • Complete Axles & Third Members
  • Complete Axle Assemblies
  • Currie
    • A high-clearance aftermarket tie rod is required (see notes below).

    A high-clearance aftermarket tie rod is required (see notes below).

    Currie Enterprises High Pinion HD60 Front Axle with 5. The vehicle's factory outer steering and brake components must be transferred to the HD60 to complete the assembly.375-inch.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Transmission & Drivetrain Parts
  • Drivetrain & Differential
  • Complete Axles & Third Members
  • Complete Axle Assemblies
  • Currie
    • Not compatible with the factory Rubicon carriers.Outer Knuckle Assemblies: The Currie 44 is designed to reuse the complete stock JK outer knuckle assemblies from the ball joints out (knuckles, hubs, disk brake calipers, and rotors)Overall Width: Axle width is 65.375 inches (stock JK width) between wheel mounting surfacesTire Size: Recommended maximum 37-inch tire size due to the inherent limitations of the stock brakes, wheel bearings, and axle u-jointsFull specifications:Center Section:Currie 44 high-pinion nodular-iron center section with thicker walls and webbingDifferential Carrier: Compatible Lockers - ARB RD117 or Eaton ELocker 19977-010Gear Set: Larger/stronger Dana 44 8.8 late model JK ring and pinion setPinion Yoke: 1310 (stock size) pinion companion flangeDifferential Cover: Powder coat red Currie nodular-iron cover with gasketed fill plug with dipstickEnd Forgings: Currie heavy-duty forged steel inner C'sAxle Tubes: 3 inch diameter, .5 wall DOM tubeAxles: Currie Performance 4340 chromoly 30/32-spline inner/outer axles with 1350 u-joints (Compatible with Motive Gear/Ten Factory Rubicon replacement axles) Suspension Brackets: Heavy gauge 3/16 laser cut steel bracketsControl Arm Mounts: Upper control and lower cont 07-18 Jeep Wrangler JK;5.13 gear ratio with Eaton ELocker Locker;Front axle assembly;65.375 stock JK width;High-pinion heavy-duty center section;4340 chromoly axles with larger Rubicon u-joints;3 diameter, .5 wall DOM axle tubes;Massive forged Currie inner knuckles;Rock-proof Currie nodular iron cover;Satin black powder coat finish for long lasting protection;Optimized for 4 lift kit with 5 degrees of pinion angle to reduce driveshaft angle;5 degrees of caster for improved steering;Shipped fully assembled and ready for factory outer steering components;See important notes & specs below;California Residents: WARNING

    Not compatible with the factory Rubicon carriers.Outer Knuckle Assemblies: The Currie 44 is designed to reuse the complete stock JK outer knuckle assemblies from the ball joints out (knuckles, hubs, disk brake calipers, and rotors)Overall Width: Axle width is 65.375 inches (stock JK width) between wheel mounting surfacesTire Size: Recommended maximum 37-inch tire size due to the inherent limitations of the stock brakes, wheel bearings, and axle u-jointsFull specifications:Center Section:Currie 44 high-pinion nodular-iron center section with thicker walls and webbingDifferential Carrier: Compatible Lockers - ARB RD117 or Eaton ELocker 19977-010Gear Set: Larger/stronger Dana 44 8.8 late model JK ring and pinion setPinion Yoke: 1310 (stock size) pinion companion flangeDifferential Cover: Powder coat red Currie nodular-iron cover with gasketed fill plug with dipstickEnd Forgings: Currie heavy-duty forged steel inner C'sAxle Tubes: 3 inch diameter, .5 wall DOM tubeAxles: Currie Performance 4340 chromoly 30/32-spline inner/outer axles with 1350 u-joints (Compatible with Motive Gear/Ten Factory Rubicon replacement axles) Suspension Brackets: Heavy gauge 3/16 laser cut steel bracketsControl Arm Mounts: Upper control and lower cont 07-18 Jeep Wrangler JK;5.13 gear ratio with Eaton ELocker Locker;Front axle assembly;65.375 stock JK width;High-pinion heavy-duty center section;4340 chromoly axles with larger Rubicon u-joints;3 diameter, .5 wall DOM axle tubes;Massive forged Currie inner knuckles;Rock-proof Currie nodular iron cover;Satin black powder coat finish for long lasting protection;Optimized for 4 lift kit with 5 degrees of pinion angle to reduce driveshaft angle;5 degrees of caster for improved steering;Shipped fully assembled and ready for factory outer steering components;See important notes & specs below;California Residents: WARNING

    13 Ratio with Eaton ELocker Locker - CE-KF4400E51. Currie Enterprises Currie 44 - High-Pinion Jeep JK Front Axle - 5.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Motor Vehicle Parts
  • Motor Vehicle Transmission & Drivetrain Parts
  • Drivetrain & Differential
  • Complete Axles & Third Members
  • Complete Axle Assemblies
  • Currie
    • Artecs EASY 4-LINK KIT A is the simplest way to get your links done.

    Artecs EASY 4-LINK KIT A is the simplest way to get your links done.

    The brackets available in this kit allow for separate upper and lower mounts on the frame side for customizable 4-link setups.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Fabrication & Tools
  • Flex Joints,Rod Ends & Jam Nuts
  • Heim Joints
  • Artec Industries
    • The JMX series utilizes a high strength Heat treated 4130 Chromoly body with a silver zinc finish with a smooth PTFE (Teflon) liner for smooth operation.

    The JMX series utilizes a high strength Heat treated 4130 Chromoly body with a silver zinc finish with a smooth PTFE (Teflon) liner for smooth operation.

    Features:Thread Rotation: Right Hand StandardSize: 1.These rod ends are the best way to add strength, reliability, and flexibility to any situation that requires use of a rod end such as in suspension or steering applications.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Fabrication & Tools
  • Flex Joints,Rod Ends & Jam Nuts
  • Rod Ends,Heim,Johnny & NG Joints
  • Artec Industries
    • Our mounts are constructed from rigid 1/8 thick steel and designed using State-of-the-Art 3D modeling with files directly from the manufacturer for a precise fit.

    Our mounts are constructed from rigid 1/8 thick steel and designed using State-of-the-Art 3D modeling with files directly from the manufacturer for a precise fit.

    Artec Industries is excited to announce our new JL Light Bar Mount for two cube (aka dually, D-series, or pod) LED Lights. 20-Current Gladiator JT;18-Current Wrangler JL, 2 & 4 Door;Does not fit 4xE;Designed for Rigid Industries D Series light dually lights and fit most pod lights with metal mounting brackets;Rigid 1/8 construction;Designed using original OEM files and CNC laser cut and CNC bent in-house for precise fit;Fully welded and powder coated for direct bolt-in installation;Made in the USA in house from USA materials;Light mounts only;Lights sold separately;California Residents: WARNING Artec Industries A-Pillar Dual LED Cube Light Mount - JL5603 All this at a PHENOMENAL PRICE and manufactured in-house which means its MADE IN THE USA! These light mounts are hard powdercoated for direct bolt-on installation and a long life..

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Lighting & Lighting Accessories
  • Light Mounting Brackets & Cradles
  • A-Pillar Lighting Mounts
  • Artec Industries
    • These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style.

    These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style.

    Wrangler JL, 2 & 4 Door;Allows use of larger tires...Artec Industries is excited to announce our new JL Front Inner Fenders.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Fenders & Flares
  • Fender Liners
  • Artec Industries
    • Protect it before it gets damaged.

    Protect it before it gets damaged.

    Wrangler JL, 2 & 4 Door;Fits over the OEM LCA bracket;Integrated skid plate on the bottom of the bracket;3/16 thick boxed steel plate;California Residents: WARNING Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599 These heavy-duty skid plates protect and beef up the factory brackets so you'll never have to worry about damaging the OEM bracket.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Armor & Protection
  • Skid Plates
  • Artec Industries
    • These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style.

    These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style.

    ...Artec Industries is excited to announce our new JL Front Inner Fenders.

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Fenders & Flares
  • Fender Liners
  • Artec Industries
    • Protect it before it gets damaged.

    Protect it before it gets damaged.

    Wrangler JL, 2 & 4 Door;Fits over the OEM LCA bracket;Integrated skid plate on the bottom of the bracket;3/16 thick boxed steel plate;California Residents: WARNING Artec Industries Rear Axle LCA Bolt-on Skid Plate - JL4599 These heavy-duty skid plates protect and beef up the factory brackets so you'll never have to worry about damaging the OEM bracket..

  • Vehicles & Parts
  • Vehicle Parts & Accessories
  • Armor & Protection
  • Skid Plates
  • Artec Industries